A read-only table that lists routes from all the address families as well as all filtered routes with all possible route attributes.
[admin@rack1_b42_RB2011] /routing/route> print
Flags: A - ACTIVE; c, s, a, l, y - COPY; H - HW-OFFLOADED
Columns: DST-ADDRESS, GATEWAY, AFI, DISTANCE, SCOPE, TARGET-SCOPE, IMMEDIATE-GW
DST-ADDRESS GATEWAY AFI D SCOPE TA IMMEDIATE-GW
lH 10.0.0.0/8 ip4 0
;;; defconf
As 10.0.0.0/8 10.155.130.1 ip4 1 30 10 10.155.130.1%ether1
lH 10.155.130.0/25 ip4 0
Ac 10.155.130.0/25 ether1 ip4 0 10 ether1
aH 10.155.130.12/32 ip4 0
lH 111.13.0.0/24 ip4 0
Ac 111.13.0.0/24 ether2 ip4 0 10 ether2
aH 111.13.0.1/32 ip4 0
Ac 111.111.111.2/32 loopback@vrfTest ip4 0 10 loopback
Ac 2111:4::/64 ether2 ip6 0 10 ether2
Ac fe80::%ether1/64 ether1 ip6 0 10 ether1
Ac fe80::%ether2/64 ether2 ip6 0 10 ether2
Ac fe80::%ether3/64 ether3 ip6 0 10 ether3
Ac fe80::%ether4/64 ether4 ip6 0 10 ether4
Ac 3333::2/128 loopback@vrfTest ip6 0 10 loopback
Ac fe80::%loopback/64 loopback@vrfTest ip6 0 10 loopback
Ay 111.111.111.2/32&65530:100 loopback@vrfTest vpn4 0 10 5 loopback
Ay 3333::2/128&65530:100 loopback@vrfTest vpn6 0 10 5 loopback
A H ether1 link 0
A H ether2 link 0
A H ether3 link 0
A H ether4 link 0
A H loopback link 0
| Property | Description | |
|---|---|---|
| active (yes | no) | A flag indicates whether the route is elected as Active and eligible to be added to the FIB. | |
| afi (ip4 | ip6 | link) | Address family this route belongs to. | |
| belongs-to (string) | Descriptive info showing from where the route was received. | |
| bgp (yes | no) | A flag indicates whether this route was added by the BGP protocol. | |
| bgp - a group of parameters associated with the BGP protocol | ||
| .as-path(string) | value of the AS_PATH BGP attribute | |
| .aggregator (string) | ||
| .atomic-aggregate (yes | no) | ||
| .cluster-list (string) | ||
| .communities (string) | value of the COMMUNITIES BGP attribute | |
| .ext-communities (string) | value of the EXTENDED_COMMUNITIES BGP attribute | |
| .igp-metric(string) | value of the IGP_METRIC BGP attribute | |
| .large-communities (string) | value of the LARGE_COMMUNITIES BGP attribute | |
| .local-pref (string) | value of the LOCAL_PREF BGP attribute | |
| .med (string) | value of the MED BGP attribute | |
| .nexthop (string) | ||
| .origin (string) | ||
| .originator-id (string) | ||
| .out-nexthop(string) | ||
| .peer-cache-id (string) | The ID of the BGP session that installed the route. See /routing/bgp/session menu. | |
| .unknown (string) | hex blob of unknown BGP attributes | |
| .weight (string) | ||
| blackhole (yes | no) | A flag indicates whether it is a blackhole route | |
| check-gateway (ping | arp | bfd) | Currently used check-gateway option. | |
| comment (string) | ||
| connect (yes | no) | A flag indicates whether it is a connected network route. | |
| contribution (string) | Shows the route status contributing to the election process, e.g "filtered, active, candidate" | |
| copy (yes | no) | A flag indicates a copy of the route to be redistributed as the L3VPN route. VPNv4/6 related attributes are attached to this "copy" route. | |
| create-time (string) | ||
| debug - a group of debugging parameters | ||
| dhcp (yes | no) | A flag indicates whether the route was added by the DHCP service. | |
| disabled (yes | no) | A flag indicates whether the route is disabled. | |
| distance (integer) | ||
| dst-address (prefix) | Route destination. | |
| ecmp (yes | no) | A flag indicates whether the route is added as an Equal-Cost Multi-Path route in the FIB. Read more>> | |
| filtered (yes | no) | A flag indicates whether the route was filtered by routing filters and excluded from being used as the best route. | |
| gateway (string) | Configured gateway, for the actually resolved gateway, see immediate-gw parameter. | |
| hw-offloaded (yes | no) | Indicates whether the route is eligible to be hardware offloaded on supported hardware. | |
| immediate-gw (string) | Shows actual (resolved) gateway and interface that will be used for packet forwarding. Displayed in format [ip%interface]. | |
| label (integer) | ||
| ldp-address (yes | no) | A flag indicates whether the route entry is an LDP address. | |
| ldp-mapping (yes | no) | A flag indicates whether the route entry is the LDP mapping | |
| ldp - a group of parameters associated with the LDP protocol | ||
| .label (integer) | LDP mapped MPLS label. | |
| .peer-id () | ||
| local-address (IP) | Local IP address of the connected network. | |
| modem (yes | no) | A flag indicates whether the route is added by the LTE or 3g modems. | |
| mpls - group of generic parameters associated with the MPLS | ||
| .in-label () | Mapped MPLS ingress label | |
| .labels () | ||
| .out-label () | Mapped MPLS egress label | |
| nexthop-id () | ||
| ospf (yes | no) | A flag indicates whether the route was added by the OSPF routing protocol. | |
| ospf - group of parameters associated with the OSPF protocol | ||
| .metric (integer) | ||
| .type (string) | ||
| pref-src () | ||
| received-from () | ||
| rip (yes | no) | A flag indicates whether the route was added by the RIP routing protocol | |
| rip - group of parameters associated with the RIP protocol | ||
| .metric () | ||
| .route-tag () | ||
| route-cost () | ||
| routing-table () | Routing table this route belongs to. | |
| rpki (valid | invalid | unknown) | Current status of the prefix from the RPKI validation process. | |
| scope (integer) | Scope used in the next-hop lookup process. Read more>> | |
| static (yes | no) | A flag indicates statically added routes. | |
| target-scope (integer) | Target scope used in next-hop lookup process. Read more>> | |
| te-tunnel-id () | Traffic Engineering tunnel ID | |
| total-cost () | ||
| unreachable (yes | no) | A flag indicates whether the route next-hop is unreachable. | |
| update-time () | ||
| ve-block-offset | ||
| ve-block-size | ||
| ve-id | ||
| vpn (yes | no) | A flag indicates whether the route was added by one of the VPN protocols (PPPoE, L2TP, SSTP, etc.) | |
| vrf-interface () | Internal use only parameter which allows identifying to which VRF route should be added. Used by services that add routes dynamically, for example, DHCP client. Shown for debugging purposes. | |