A read-only table that lists routes from all the address families as well as all filtered routes with all possible route attributes.
Default example output of the table with various route types:
[admin@MikroTik] /routing/route> print Flags: A - ACTIVE; c, s, a, l, y - COPY; H - HW-OFFLOADED Columns: DST-ADDRESS, GATEWAY, AFI, DISTANCE, SCOPE, TARGET-SCOPE, IMMEDIATE-GW DST-ADDRESS GATEWAY AFI D SCOPE TA IMMEDIATE-GW lH 10.0.0.0/8 ip4 0 ;;; defconf As 10.0.0.0/8 10.155.130.1 ip4 1 30 10 10.155.130.1%ether1 lH 10.155.130.0/25 ip4 0 Ac 10.155.130.0/25 ether1 ip4 0 10 ether1 aH 10.155.130.12/32 ip4 0 lH 111.13.0.0/24 ip4 0 Ac 111.13.0.0/24 ether2 ip4 0 10 ether2 aH 111.13.0.1/32 ip4 0 Ac 111.111.111.2/32 loopback@vrfTest ip4 0 10 loopback Ac 2111:4::/64 ether2 ip6 0 10 ether2 Ac fe80::%ether1/64 ether1 ip6 0 10 ether1 Ac fe80::%ether2/64 ether2 ip6 0 10 ether2 Ac fe80::%ether3/64 ether3 ip6 0 10 ether3 Ac fe80::%ether4/64 ether4 ip6 0 10 ether4 Ac 3333::2/128 loopback@vrfTest ip6 0 10 loopback Ac fe80::%loopback/64 loopback@vrfTest ip6 0 10 loopback Ay 111.111.111.2/32&65530:100 loopback@vrfTest vpn4 0 10 5 loopback Ay 3333::2/128&65530:100 loopback@vrfTest vpn6 0 10 5 loopback A H ether1 link 0 A H ether2 link 0 A H ether3 link 0 A H ether4 link 0 A H loopback link 0
Detailed example output with some BGP, OSPF, and other routes:
[admin@MikroTik] /routing/route> print detail Flags: X - disabled, F - filtered, U - unreachable, A - active; c - connect, s - static, r - rip, b - bgp, o - ospf, d - dhcp, v - vpn, m - modem, a - ldp-address, l - ldp-mapping, y - copy; H - hw-offloaded; + - ecmp, B - blackhole o afi=ip4 contribution=best-candidate dst-address=0.0.0.0/0 routing-table=main gateway=10.155.101.1%ether1 immediate-gw=10.155.101.1%ether1 distance=110 scope=20 target-scope=10 belongs-to="OSPF route" ospf.metric=2 .tag=111 .type=ext-type-1 debug.fwp-ptr=0x203425A0 Ad + afi=ip4 contribution=active dst-address=0.0.0.0/0 routing-table=main pref-src="" gateway=10.155.101.1 immediate-gw=10.155.101.1%ether1 distance=1 scope=30 target-scope=10 vrf-interface=ether1 belongs-to="DHCP route" debug.fwp-ptr=0x20342060 As + afi=ip4 contribution=active dst-address=0.0.0.0/0 routing-table=main pref-src="" gateway=10.155.101.1 immediate-gw=10.155.101.1%ether1 distance=1 scope=30 target-scope=10 belongs-to="Static route" debug.fwp-ptr=0x20342060 Fb afi=ip4 contribution=filtered dst-address=1.0.0.0/24 routing-table=main gateway=10.155.101.1 immediate-gw=10.155.101.1%ether1 distance=20 scope=40 target-scope=10 belongs-to="BGP IP routes from 10.155.101.217" rpki=valid bgp.peer-cache-id=*B000002 .aggregator="13335:172.68.180.1" .as-path="65530,100,9002,13335" .atomic-aggregate=yes .origin=igp debug.fwp-ptr=0x20342960
Property | Description | |
---|---|---|
active (yes | no) | A flag indicates whether the route is elected as Active and eligible to be added to the FIB. | |
afi (ip4 | ip6 | link) | Address family this route belongs to. | |
belongs-to (string) | Descriptive info showing from where the route was received. | |
bgp (yes | no) | A flag indicates whether this route was added by the BGP protocol. | |
bgp - a group of parameters associated with the BGP protocol | ||
.as-path(string) | value of the AS_PATH BGP attribute | |
.aggregator (string) | ||
.atomic-aggregate (yes | no) | ||
.cluster-list (string) | ||
.communities (string) | value of the COMMUNITIES BGP attribute | |
.ext-communities (string) | value of the EXTENDED_COMMUNITIES BGP attribute | |
.igp-metric(string) | value of the IGP_METRIC BGP attribute | |
.large-communities (string) | value of the LARGE_COMMUNITIES BGP attribute | |
.local-pref (string) | value of the LOCAL_PREF BGP attribute | |
.med (string) | value of the MED BGP attribute | |
.nexthop (string) | ||
.origin (string) | ||
.originator-id (string) | ||
.out-nexthop(string) | ||
.peer-cache-id (string) | The ID of the BGP session that installed the route. See /routing/bgp/session menu. | |
.unknown (string) | hex blob of unknown BGP attributes | |
.weight (string) | ||
blackhole (yes | no) | A flag indicates whether it is a blackhole route | |
check-gateway (ping | arp | bfd) | Currently used check-gateway option. | |
comment (string) | ||
connect (yes | no) | A flag indicates whether it is a connected network route. | |
contribution (string) | Shows the route status contributing to the election process, e.g "filtered, active, candidate" | |
copy (yes | no) | A flag indicates a copy of the route to be redistributed as the L3VPN route. VPNv4/6 related attributes are attached to this "copy" route. | |
create-time (string) | ||
debug - a group of debugging parameters | ||
dhcp (yes | no) | A flag indicates whether the route was added by the DHCP service. | |
disabled (yes | no) | A flag indicates whether the route is disabled. | |
distance (integer) | ||
dst-address (prefix) | Route destination. | |
ecmp (yes | no) | A flag indicates whether the route is added as an Equal-Cost Multi-Path route in the FIB. Read more>> | |
filtered (yes | no) | A flag indicates whether the route was filtered by routing filters and excluded from being used as the best route. | |
gateway (string) | Configured gateway, for the actually resolved gateway, see immediate-gw parameter. | |
hw-offloaded (yes | no) | Indicates whether the route is eligible to be hardware offloaded on supported hardware. | |
immediate-gw (string) | Shows actual (resolved) gateway and interface that will be used for packet forwarding. Displayed in format [ip%interface] . | |
label (integer) | ||
ldp-address (yes | no) | A flag indicates whether the route entry is an LDP address. | |
ldp-mapping (yes | no) | A flag indicates whether the route entry is the LDP mapping | |
ldp - a group of parameters associated with the LDP protocol | ||
.label (integer) | LDP mapped MPLS label. | |
.peer-id () | ||
local-address (IP) | Local IP address of the connected network. | |
modem (yes | no) | A flag indicates whether the route is added by the LTE or 3g modems. | |
mpls - group of generic parameters associated with the MPLS | ||
.in-label () | Mapped MPLS ingress label | |
.labels () | ||
.out-label () | Mapped MPLS egress label | |
nexthop-id () | ||
ospf (yes | no) | A flag indicates whether the route was added by the OSPF routing protocol. | |
ospf - group of parameters associated with the OSPF protocol | ||
.metric (integer) | ||
.type (string) | ||
pref-src () | ||
received-from () | ||
rip (yes | no) | A flag indicates whether the route was added by the RIP routing protocol | |
rip - group of parameters associated with the RIP protocol | ||
.metric () | ||
.route-tag () | ||
route-cost () | ||
routing-table () | Routing table this route belongs to. | |
rpki (valid | invalid | unknown) | Current status of the prefix from the RPKI validation process. | |
scope (integer) | Scope used in the next-hop lookup process. Read more>> | |
static (yes | no) | A flag indicates statically added routes. | |
target-scope (integer) | Target scope used in next-hop lookup process. Read more>> | |
te-tunnel-id () | Traffic Engineering tunnel ID | |
total-cost () | ||
unreachable (yes | no) | A flag indicates whether the route next-hop is unreachable. | |
update-time () | ||
ve-block-offset | ||
ve-block-size | ||
ve-id | ||
vpn (yes | no) | A flag indicates whether the route was added by one of the VPN protocols (PPPoE, L2TP, SSTP, etc.) | |
vrf-interface () | Internal use only parameter which allows identifying to which VRF route should be added. Used by services that add routes dynamically, for example, DHCP client. Shown for debugging purposes. |