Property | Description |
---|
active (yes | no) | A flag indicates whether the route is elected as Active and eligible to be added to the FIB. |
afi (ip4 | ip6 | link) | Address family this route belongs to. |
belongs-to (string) | Descriptive info showing from where the route was received. |
bgp (yes | no) | A flag indicates whether this route was added by the BGP protocol. |
bgp - a group of parameters associated with the BGP protocol |
| .as-path(string) | value of the AS_PATH BGP attribute |
| .aggregator (string) |
|
| .atomic-aggregate (yes | no) |
|
| .cluster-list (string) |
|
| .communities (string) | value of the COMMUNITIES BGP attribute |
| .ext-communities (string) | value of the EXTENDED_COMMUNITIES BGP attribute |
| .igp-metric(string) | value of the IGP_METRIC BGP attribute |
| .large-communities (string) | value of the LARGE_COMMUNITIES BGP attribute |
| .local-pref (string) | value of the LOCAL_PREF BGP attribute |
| .med (string) | value of the MED BGP attribute |
| .nexthop (string) |
|
| .origin (string) |
|
| .originator-id (string) |
|
| .out-nexthop(string) |
|
| .peer-cache-id (string) | The ID of the BGP session that installed the route. See /routing/bgp/session menu. |
| .unknown (string) | hex blob of unknown BGP attributes |
| .weight (string) |
|
blackhole (yes | no) | A flag indicates whether it is a blackhole route |
check-gateway (ping | arp | bfd) | Currently used check-gateway option. |
comment (string) |
|
connect (yes | no) | A flag indicates whether it is a connected network route. |
contribution (string) | Shows the route status contributing to the election process, e.g "filtered, active, candidate" |
copy (yes | no) | A flag indicates a copy of the route to be redistributed as the L3VPN route. VPNv4/6 related attributes are attached to this "copy" route. |
create-time (string) |
|
debug - a group of debugging parameters |
|
|
|
dhcp (yes | no) | A flag indicates whether the route was added by the DHCP service. |
disabled (yes | no) | A flag indicates whether the route is disabled. |
distance (integer) |
|
dst-address (prefix) | Route destination. |
ecmp (yes | no) | A flag indicates whether the route is added as an Equal-Cost Multi-Path route in the FIB. Read more>> |
filtered (yes | no) | A flag indicates whether the route was filtered by routing filters and excluded from being used as the best route. |
gateway (string) | Configured gateway, for the actually resolved gateway, see immediate-gw parameter. |
hw-offloaded (yes | no) | Indicates whether the route is eligible to be hardware offloaded on supported hardware. |
immediate-gw (string) | Shows actual (resolved) gateway and interface that will be used for packet forwarding. Displayed in format [ip%interface] . |
label (integer) |
|
ldp-address (yes | no) | A flag indicates whether the route entry is an LDP address. |
ldp-mapping (yes | no) | A flag indicates whether the route entry is the LDP mapping |
ldp - a group of parameters associated with the LDP protocol |
| .label (integer) | LDP mapped MPLS label. |
| .peer-id () |
|
local-address (IP) | Local IP address of the connected network. |
modem (yes | no) | A flag indicates whether the route is added by the LTE or 3g modems. |
mpls - group of generic parameters associated with the MPLS |
| .in-label () | Mapped MPLS ingress label |
| .labels () |
|
| .out-label () | Mapped MPLS egress label |
nexthop-id () |
|
ospf (yes | no) | A flag indicates whether the route was added by the OSPF routing protocol. |
ospf - group of parameters associated with the OSPF protocol |
| .metric (integer) |
|
| .type (string) |
|
pref-src () |
|
received-from () |
|
rip (yes | no) | A flag indicates whether the route was added by the RIP routing protocol |
rip - group of parameters associated with the RIP protocol |
| .metric () |
|
| .route-tag () |
|
route-cost () |
|
routing-table () | Routing table this route belongs to. |
rpki (valid | invalid | unknown) | Current status of the prefix from the RPKI validation process. |
scope (integer) | Scope used in the next-hop lookup process. Read more>> |
static (yes | no) | A flag indicates statically added routes. |
target-scope (integer) | Target scope used in next-hop lookup process. Read more>> |
te-tunnel-id () | Traffic Engineering tunnel ID |
total-cost () |
|
unreachable (yes | no) | A flag indicates whether the route next-hop is unreachable. |
update-time () |
|
| ve-block-offset |
|
| ve-block-size |
|
| ve-id |
|
vpn (yes | no) | A flag indicates whether the route was added by one of the VPN protocols (PPPoE, L2TP, SSTP, etc.) |
vrf-interface () | Internal use only parameter which allows identifying to which VRF route should be added. Used by services that add routes dynamically, for example, DHCP client. Shown for debugging purposes. |