2.5.0

  • Added new advertisement type "Device Name".
  • Reduce device power consumption during activities. For short-interval advertisements will result in a noticeable reduction.
  • Reduce power consumption if beacons with temperature data are enabled.
  • Reduce WDT (watchdog timer) power consumption. This will have an effect if any beacon with advertising interval less than 7s is enabled.

2.4.0

  • Include ad flags field in all advertisements.
  • Added functionality to disable password protection.
  • Added possibility to disable accelerometer.
  • Added an option for MikroTik format payload to detect disabled accelerometer (flags field now can indicate disabled accelerometer state).
  • Allow setting non-standard advertising intervals.
  • Added configuration option to disable an advertising channel.
  • Implemented configurable connectable advertisements, allowing to connect to the tag in a configurable state, without holding the magnet.
  • Add configuration option for accelerometer to set filter type: HPF, LPF (high pass or low pass filters).
  • Improvements to logging.

2.3.1

  • Improved device performance.

2.3.0

  • Upgraded Bluetooth stack version.
  • Improved device performance.

2.2.0

  • Added support for non-standard advertising intervals.

2.1.0

  • Fixed timing inconsistencies after wake-up from the factory sleep mode.
  • Improved LED behavior before the device enters the configuration mode.

2.0.0

  • Restriction to set the wake-up threshold to 0g.
  • Added Write Protection feature.
  • Increase the minimal valid value of the wake-up threshold.
  • Upgraded Bluetooth stack version.

1.6.0

  • Improved Data Log stability.

  • Added an option to allow users to manually calibrate the sensor's temperature (offset).

1.5.0

  • Added a new trigger Impact.
  • Added Data Logs.

1.4.0

  • Added an option to reset the device back into the advertising mode.
  • Added an option to clear saved log messages.
  • Added a Unix Time parameter.
  • No labels