/routing/id
Global Router ID election configuration. ID can be configured explicitly or set to be elected from one of the Routers IP addresses.
For each VRF table RouterOS adds dynamic ID instance, that elects the ID from one of the IP addresses belonging to a particular VRF:
[admin@rack1_b33_CCR1036] /routing/id> print Flags: D - DYNAMIC, I - INACTIVE Columns: NAME, DYNAMIC-ID, SELECT-DYNAMIC-ID, SELECT-FROM-VRF # NAME DYNAMIC-ID SELECT-D SELE 0 D main 111.111.111.2 only-vrf main
Property | Description |
---|---|
comment (string) | |
disabled (yes | no) | ID reference is not used. |
id(IP) | Parameter to explicitly set the Router ID. If ID is not explicitly specified, then it can be elected from one of the configured IP addresses on the router. See parameters select-dynamic-id and select-from-vrf. |
name (string) | Reference name |
select-dynamic-id(any | lowest | only-active | only-loopback | only-static | only-vrf) | States what IP addresses to use for the ID election:
|
select-from-vrf (name) | VRF from which to select IP addresses for the ID election. |
Read-only Properties
Property | Description |
---|---|
dynamic (yes | no) | |
dynamic-id (IP) | Currently selected ID. |
inactive (yes | no) | If there was a problem to get a valid ID, then item can become inactive. |