You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

N/A - Feature not yet available

OK - Initial tests successful

NOK - initial tests not successful

Highlight Colors:

  • Yellow - partially working
  • Green - Working
  • Red - Not working at the moment

Feature

Beta7

IPv4 Route RulesOK
IPv6 Router RulesNOK
ECMP flagsOK
dst@tableOK
gateway@tableOK
gateway%interfaceOK
recursive route over ipv6 LL addressOK
3 level recursive gateway with ECMP OK
IPV6 ECMPOK
Addresses from same subnet to multiple interfacesNOK
Show time when route was last updatedN/A
Check GatewayPing OK, ARP NOK (works as ping), BFD NOK (not implemented)
Scope and target scopeOK
IPv4 Mangle routing-markOK
IPv6 Mangle routing-markNOK (Added but does not work at the moment)
Packet SRC address

NOK (wrong src is picked for locally originated pacekets)

Routing-table parameter for ping and telnetNOK
IPv6 connected routes in kernel

NOK (ROS-12608)

Old connected routes are not removed

IPv6 connected ECMP

Not supported in Kernel

Show if route is harware acceleratedN/A
Custom route selection policy N/A
IPv4 with IPv6 nexthops and RFC5549N/A


Routing InstanceOK
VRFOK
Some kind of mechanism to import/export routes from one vrf to another within same routerN/A


OSPF neigbors in in NSSA AreaCannot establish adjacency (ROS-12206)
OSPF in boadcast networkDoes not work with more than 2 neighbors (ROS-12201)
OSPF with routing filtersOK
OSPF Virtual LinkOK
BGP and OSPF SNMP monitoringN/A


BGP Templates and dynamic peersOK
BGP connect listen on networkOK
BGP guess remote.asOK
Show from which peer route receivedN/A
BGP Address FamiliesCurrently only IPv4, IPv6
BGP input.accept-*Does not work right after peer established, need to resend routes
eBGP nexthop selfOK
BFDN/A
Input FilterOK
Output FilterOK
BGP Local addess auto selectionOK
BGP route reflectOK
BGP route serverOK
BGP Roles
https://datatracker.ietf.org/doc/draft-ietf-idr-bgp-open-policy/?include_text=1
OK
BGP peer-cache uptime in "established" stateN/A


BGP Flow SpecFlow spec attributes are forwarded
BGP SelectionOK


BGP Selection (Multipath)N/A
BGP ConfederationN/A
BGP AggregationN/A
BGP ORFN/A
Discard prefix RTBH  rfc 6666N/A
AS-wide Unique BGP Identifier RFC 6286N/A
MPLSN/A


RPKI sessionOK
RPKI possibility to view received info of specific prefixN/A
RPKI show connection statusN/A


Routing filter chain drop by default without rulesOK
Routing filter prefix match

OK

Routing filter protocol matchMissing other protocols like modem DHCP etc (these routes are not matched by "static")
Routing filter append communitiesOK
Routing filter append large communityOK
Routing filter set weight"sub, add" does not work if attribute has default unset value, if attribute is not set then default value should be assumed.
Routing filter set local pref"sub, add" does not work if attribute has default unset value, default value should be 100 if not set.
Routing filter set MED"sub,add" should assume default value. 
Routing filter set originOK
Routing filter set igp metric from OSPF cost Can be set with set-num-prop=bgp-igp-metric<add>ospf-ext-metric or ospf-metric, but what to do if it is not possible to guess which metric to use?
Routing filter match prefix with address listOK
Routing filter match community/large community listsOK
Routing filter add prefix to address listN/A
Routing filter validate prefix with RPKIOK
  • No labels