You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 82 Current »

Feature Status

N/A - Feature not yet available

OK - Initial tests successful

NOK - initial tests not successful

Highlight Colors:

  • Yellow - partially working
  • Green - Working
  • Red - Not working at the moment

Feature

v7.1v7.2v7.3v7.6v7.7v7.10v7.12v7.14

v7.15

Winbox         
BGP support








OSPF support








RIP support








Router ID support








Routing filter support


















Generic         
/31 address supportN/A
Routed traffic does not work to odd address.





Convert route rules after upgrade from v6.x








Static IPv6 upgrade from ROS v6








IPv4 Route Rules








IPv6 Route Rules








ECMP flags








dst@table








gateway@table








gateway%interface








recursive route over ipv6 LL address








3 level recursive gateway with ECMP 








IPV6 ECMP








IPv6 connected ECMP








Addresses from same subnet to multiple interfacesN/A







Show time when route was last updatedN/A







Check GatewayBFD not ready







Scope and target scope








IPv4 Mangle routing-mark








IPv6 Mangle routing-mark








Packet SRC addressDoes not work correctly with /32 addresses







Routing-table parameter for ping and telnet








Show if route is hardware acceleratedShows if route is candidate for HW acceleration







Custom route selection policy 








IPv4 with IPv6 nexthops for RFC5549


















Routing id








VRF








Management services support for VRFs telnet, ssh, api, www services can be set to listen on specific VRF







Some kind of mechanism to import/export routes from one vrf to another within same routerN/A







BFDN/A



Initial support












OSPF         
Convert OSPF config from v6 to v7 after upgrade

Known conversion problems:

  • NBMA neighbors place in backbone
  • ospf-v2 networks + interface may have issues

  • dynamic interfaces may have issues

  • MPLS PE CE features are not converted









OSPF neighbors in NSSA Area








OSPF in broadcast network








OSPF with routing filters








OSPF Virtual Link








OPSF input filtering








HMAC-SHA auth RFC5709N/A

Initial support




OSPF SNMP monitoringN/A







BGP SNMP monitoring




For ipv4 sessions












IS-IS








IPv4





Initial support

IPv6








Traffic Engineering


















BGP         
Convert BGP config from v6 to v7 after upgrade








BGP Templates and dynamic peers








BGP connect listen on a network








BGP guess remote.as








Show from which peer route receivedOK ( /routing/route/print detail --> belongs-to)







BGP Address Families








BGP input.accept-*








eBGP nexthop self








Input Filter








Output Filter








BGP Local address auto selection








BGP route reflect








BGP route server








BGP Roles
https://datatracker.ietf.org/doc/draft-ietf-idr-bgp-open-policy/?include_text=1
rfc roles not fully implemented







BGP session uptime in "established" state








BGP session last established time


















BGP Flow SpecFlow spec attributes are forwarded







BGP Selection


















BGP Selection (Multipath)N/A







BGP Confederation








BGP AggregationN/A







BGP ORFN/A







Discard prefix RTBH  RFC 6666N/A







AS-wide Unique BGP Identifier RFC 6286N/A







Exported PDU PCAP saver








Exported PDU PCAP loader








BGP Advertisement monitoring
Initial implementation by dumping to pcap
Advertisements rework




BGP Prefix limit

Initial support





BGP advertise IPv4 prefix with IPv6 nexthop (RFC5549)








BGP VPNv6 support




Prerequisites are made, need to add actual BGP Afi












MPLS         
Static label mapping








Static mapping upgrade from v6








LDP IPv4 mapping








LDP IPv6 mapping








LDP signaled VPLS








LDP config upgrade from v6








LDP Dual Stack








TE








TE Config upgrade from v6








VPLS Encap to TE








BGP signaled VPLS








VPLS config upgrade from v6








Fast reroute








MPLS ECMP








One label per VRF








Ability to use MPLS EXP-bit in QueuesN/A







MPLS Fast-PathN/A

















RPKI session








RPKI possibility to view received info of specific prefix








RPKI show connection status


















Filters         
Convert routing filters after upgrade from v6.x








Syntax completion








Routing filter chain drop by default without rules








Routing filter prefix match








Routing filter protocol match








Routing filter append communities








Routing filter append large community








Routing filter set weight








Routing filter set local pref








Routing filter set MED








Routing filter set origin








Routing filter set igp metric from OSPF cost








Routing filter match prefix with address list








Routing filter match community/large community lists








Routing filter add a prefix to address listN/A







Routing filter validate prefix with RPKI


















Multicast         
IGMP-Proxy








PIM-SMInitial support







Performance Status


Used hardware:

  • CCR1036, 16GB RAM (tile)
  • CCR2004(arm64)
  • CCR1100AHx4(arm)
  • Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz 32GB RAM (as a host for CHRs)


The simulated upstream peer is a CHR router running ROSv6 with a copy of the global IPv4 routing table (585K routes loaded from MRT dump).

One Peer Receive Only

DUT establishes a connection to simulated upstream peers, receives routes, and installs them in FIB.


v6.44v7.1beta3v7.1rc7
CCR0:40 - 2:120:46
RB1100x4 1.4GHz0:32-0:380:23
CCR20040:320:18
x86 (CHR)0:20

RB450G (in/out affinity=alone)after trying for 9min - ran out of memory at 558K routes2:02 (121MB free)
RB450G (in/out affinity=main)-1:54
RB450G (affinity in=alone out=input)-2:12


Two Peers Receive Only

DUT establishes a connection to two simulated upstream peers, receives routes, picks the best route, and installs in FIB. On ROSv7 affinity settings are set to "alone".


v6.44FRRv7.1beta3v7.1rc7 (846k routes per peer)
CCR1:01 - 2:45
1:11
RB1100x4 1.4GHz0:51
0:30
CCR20040:51
0:290:33
router x


0:40
x86 (CHR)0:25


x86 (virtual)
0:26(4cores)



0:46(2cores)



0:30(2cores no LDP)


Multi-homing Sim

Two DUT devices establish eBGP sessions to simulated x86 upstream routers. Both DUTs are interconnected with the iBGP session. Each DUT receives routes from upstream and readvertises routes over iBGP. On ROSv7 affinity, settings are set to "alone" and early-cut disabled.


  • Route Provider: CHR (ROSv6)
  • DUT_1: CCR1036
  • DUT_2: CCR1036
v7.1beta31:11
v7.1beta21:29
v6.xx1:02 - 8:30



  • Route Provider: CHR (ROSv6)
  • DUT_1: CCR2004
  • DUT_2: RB1100AHx2
v7.1beta30:36
v6.xx0:59

Memory Usage:

Columns: TASKS, PRIVATE-MEM-BLOCKS, SHARED-MEM-BLOCKS, PSS, RSS, VMS, RETIRED, ID, PID, RPID, PROCESS-TIME, KERNEL-TIME, CUR-BUSY, MAX-BU>
   #  TASKS                         PRIVATE-M  SHARED-M  P  R  V  RE  ID       PID  R  PROCESS-  KERNEL-  CUR  MAX-BUS  CUR  MAX-CALC
   0  routing tables                12.0MiB    30.2MiB   0  0  0  12  main     111  0  8s980ms   2s60ms   0ms  1s320ms  0ms  10s700ms
      rib                                                                                                                            
      connected networks                                                                                                             
   1  fib                           2816.0KiB  0         0  0  0      fib      130  1  3s        4s660ms       7s220ms       7s220ms 
   2  ospf                          512.0KiB   256.0KiB  0  0  0      ospf     137  1  1s220ms   130ms         980ms         1s40ms  
      connected networks                                                                                                             
   3  fantasy                       256.0KiB   0         0  0  0      fantasy  138  1  60ms      80ms          40ms          40ms    
   4  configuration and reporting   3840.0KiB  512.0KiB  0  0  0      static   139  1  1s270ms   110ms         260ms         260ms   
   5  rip                           512.0KiB   0         0  0  0      rip      136  1  120ms     70ms          60ms          120ms   
      connected networks                                                                                                             
   6  routing policy configuration  768.0KiB   768.0KiB  0  0  0      policy   133  1  2s290ms   3s170ms       80ms          80ms    
   7  BGP service                   768.0KiB   0         0  0  0      bgp      134  1  2s760ms   5s480ms       20ms          60ms    
      connected networks                                                                                                             
   8  BFD service                   512.0KiB   0         0  0  0      12       135  1  100ms     90ms          40ms          120ms   
      connected networks                                                                                                             
   9  BGP Input 10.155.101.186      3072.0KiB  6.2MiB    0  0  0      20       183  1  1s350ms   1s190ms       20ms          20ms    
  10  BGP Output 10.155.101.186     5.5MiB     0         0  0  0      21       184  1  5s400ms   500ms         3s880ms       3s880ms 
  11  BGP Input 10.155.101.232      3072.0KiB  6.2MiB    0  0  0      22       187  1  970ms     740ms         20ms          20ms    
  12  BGP Output 10.155.101.232     8.2MiB     0         0  0  0      23       188  1  10s830ms  960ms         7s            7s      
  13  Global memory                            256.0KiB               global     0  0    
  • No labels