Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the European Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 30 centimeters from your body, occupational user, or the general public.

Specifications

Info
titlenote

Please keep in mind that not all servers support 2.4 GHz LoRa communication. As of this moment, the 2.4 GHz LoRa is supported by the TTN and ChirpStack servers.

Low power-consuming with mini PCIe interface, for long-distance data, transmit:

...

Connecting to the antenna

When installing outdoors please ensure that the device case is waterproof and is designed for outdoor use. The IP rating scale for this device is IP0.
The mounting and configuration of this device should be done by a qualified person.

You can use UFL or MMCX connectors.

Info

If your device does not have internal antennas, it is possible to connect to the external antennas by adding cable connectors, product code – ACSMAUFL. https://mikrotik.com/product/acsmaufl
Please connect and disconnect the antenna, when the device is turned off!

We recommend using TOF-2400-8V-4 Omni antenna

...

When using UFL connector, attach the antenna cable to the connector

...

shown below:

Image Added

When using MMCX connector, attach the antenna cable to the connector shown below:

Image Added

After you attach the antenna, you can turn the device on. Make sure that the right connector is used by the module in the software settings.

In order to do that, go to the device's GUI and check which connector is used under LoRa Devices → "Double-click" on the gateway →  Under the "Antenna" section:

Image Added

Image Removed

When installing outdoors please ensure that the device case is waterproof and is designed for outdoor use. The IP rating scale for this device is IP0.
The mounting and configuration of this device should be done by a qualified person.

Configuration for RouterOS

...

To use the module in other devices packet forwarder from Semtech is required. https://github.com/Lora-net/gateway_2g4_hal/tree/master/packet_forwarder

Operating system support

The module supports RouterOS software version v6. Other operating systems have not been tested.

...