R11e-LR2

R11e-LR2 - LR mPCIe Gateway module. It can be integrated into a RouterBOARD product with mPCIe slot. Requires LR package installation to configure in RouterOS.

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.

Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the European Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 30 centimeters from your body, occupational user, or the general public.

Specifications

Low power-consuming with mini PCIe interface, for long-distance data, transmit:

• Product code R11e-LR2
• LoRa band 2.4 GHz
• Tx chain number 1
• Rx chain number 4
• TX/RX channels 2403 MHz, 2425 MHz, 2450 MHz, 2479 MHz
• RF Output power 10 dBm
• Operating temparature -40°C to +70°C

Installing the module in your device

R11e-LR2 for professional use. Each of the cards comes in ESD protective packaging. When handling electrical equipment please observe the following safety precautions:

• Use a wrist grounding strap when unpacking and working with electrical components to avoid electrical discharge (ESD) damage;
• After unpacking please place the card on the anti-static mat;
• When installing make sure there are no objects that can damage or touch the PCB plate;
• The card can be installed in your desired device using the factory provided screw holes in a PCB plate;

Pictures added for illustration purposes, the device configuration, and the placement of the miniPCIe card may vary.

• Locate miniPCIe slot on your device;
• Unscrew two factory attached screws;

• Install the module to the miniPCIe slot and secure it with previously removed screws. Tightening torque 0,3 Nm.

Connecting to the antenna

When installing outdoors please ensure that the device case is waterproof and is designed for outdoor use. The IP rating scale for this device is IP0.
The mounting and configuration of this device should be done by a qualified person.

You can use UFL or MMCX connectors.

When using UFL connector, attach the antenna cable to the connector shown below:

When using MMCX connector, attach the antenna cable to the connector shown below:

After you attach the antenna, you can turn the device on. Make sure that the right connector is used by the module in the software settings.

In order to do that, go to the device's GUI and check which connector is used under LoRa → Devices → "Double-click" on the gateway →  Under the "Antenna" section:

Configuration for RouterOS

To set the configuration for LR please connect to the device and log in with your web browser, Winbox, or mobile application. Two easy steps to follow:
First step:

1. Once logged in, Quick Set will be selected, please switch to WebFig on the right side of the screen. If the configuration is done through a mobile application then click on the gear symbol on the right side of the screen to open up an advanced menu.
2. On the left side menu please find and select the section "Lora".
3. On the newly opened window select the Servers tab.
4. Click + to add a new server configuration.
5. A new window will appear and you will have to enter:

Name: (Server name)
Address: (Server address)
Up port: (Usually it's 1700)
Down port: (Usually it's 1700)

1. Click OK to save.

Second step:

1. Select the Device tab on the previous window.
2. Double-click or tap on the line to configure.
3. Choose the previously entered network on the drop-down menu.
4. Click on the button Enable to enable the gateway.
5. Click OK to save.
6. The configuration is done.

Specifications

The module can be installed on the miniPCIe to USB adapter and used in any of our devices with a USB slot and installed Lora package.

To use the module in other devices packet forwarder from Semtech is required. https://github.com/Lora-net/gateway_2g4_hal/tree/master/packet_forwarder

Operating system support

The module supports RouterOS software version v6. Other operating systems have not been tested.

UKCA marking                                          

Eurasian Conformity Mark

Информация о дате изготовления устройства указана в конце серийного номера на его наклейке через дробь. Первая цифра означает номер года (последняя цифра года), две последующие означают номер недели.

Изготовитель: Mikrotikls SIA, Aizkraukles iela 23, Riga, LV-1006, Латвия, support@mikrotik.com. Сделано в Китае, Латвии или Литве. Cм. на упаковке.

Для получения подробных сведений о гарантийном обслуживании обратитесь к продавцу. Информация об импортерах продукции MikroTik в Российскую Федерацию: https://mikrotik.com/buy/europe/russia

Продукты MikroTik, которые поставляются в Евразийский таможенный союз, оцениваются с учетом соответствующих требований и помечены знаком EAC, как показано ниже:

Norma Oficial Mexicana

EFICIENCIA ENERGETICA CUMPLE CON LA NOM-029-ENER-2017.

La operacion de este equipo esta sujeta a las siguientes dos condiciones:

• Es posible que este equipo o dispositivo no cause interferencia perjudicial y.
• Este equipo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacion no deseada.

Fabricante: Mikrotikls SIA, Brivibas gatve 214i, Riga, LV-1039, Latvia.

País De Origen: Letonia; Lituania; China (Republica Popular); Estados Unidos De America; Mexico.

Por favor contacte a su distribuidor local para preguntas regionales específicas. La lista de importadores se puede encontrar en nuestra página de inicio – https://mikrotik.com/buy/latinamerica/mexico.

The National Commission for the State Regulation of Communications and Informatization by Ukraine

Виробник: Mikrotikls SIA, Brivibas gatve 214i Рига, Латвія, LV1039.

CE Declaration of Conformity

Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.

Hereby, Mikrotīkls SIA declares that the radio equipment type R11e-LR2 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://mikrotik.com/products

LR