Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

mvrp
PropertyDescription
arp (disabled | enabled | local-proxy-arp | proxy-arp | reply-only; Default: enabled)Address Resolution Protocol setting
  • disabled - the interface will not use ARP
  • enabled - the interface will use ARP
  • local-proxy-arp -  the router performs proxy ARP on the interface and sends replies to the same interface
  • proxy-arp - the router performs proxy ARP on the interface and sends replies to other interfaces
  • reply-only - the interface will only reply to requests originated from matching IP address/MAC address combinations which are entered as static entries in the IP/ARP table. No dynamic entries will be automatically stored in the IP/ARP table. Therefore for communications to be successful, a valid static entry must already exist.
arp-timeout (auto | integer; Default: auto)How long the ARP record is kept in the ARP table after no packets are received from IP. Value auto equals to the value of arp-timeout in IP/Settings, default is 30s.
disabled (yes | no; Default: no)Changes whether the bridge is disabled.
interface (name; Default: )Name of the interface on top of which VLAN will work
mtu (integer; Default: 1500)Layer3 Maximum transmission unit
mvrp (yes | no; Default: no)Specifies whether this VLAN should declare its attributes through Multiple VLAN Registration Protocol (MVRP) as an applicant. It can be used to register the VLAN with connected bridges that support MVRP.  This property only has an effect whenuse-service-tag is disabled.
mtu (integer; Default: 1500)Layer3 Maximum transmission unit
name (string; Default: )Interface name
use-service-tag (yes | no; Default: )IEEE 802.1ad compatible Service Tag
vlan-id (integer: 4095; Default: 1)Virtual LAN identifier or tag that is used to distinguish VLANs. Must be equal for all computers that belong to the same VLAN.

...