| Table of Contents |
|---|
/routing/id
Global Router ID election configuration. ID can be configured explicitly or set to be elected from one of the Routers IP addresses.
For each VRF table RouterOS adds dynamic ID instance, that elects the ID from one of the IP addresses belonging to a particular VRF:
| Code Block | ||||
|---|---|---|---|---|
| ||||
[admin@rack1_b33_CCR1036] /routing/id> print
Flags: D - DYNAMIC, I - INACTIVE
Columns: NAME, DYNAMIC-ID, SELECT-DYNAMIC-ID, SELECT-FROM-VRF
# NAME DYNAMIC-ID SELECT-D SELE
0 D main 111.111.111.2 only-vrf main
|
...
- any - any address found on the router can be elected as the Router ID.
- lowest - pick the lowest IP address.
- only-active - pick an ID only from active IP addresses.
- only-loopback - pick an ID only from loopback addresses.
- only-vrf - pick an ID only from selected VRF. Works with select-from-vrf property.
...
Read-only Properties
...
/routing/table
Read Next
...