Chateau LTE6 ax

...

(S53UG+5HaxD2HaxD-TC&FG621-EA)

The Chateau is a home router to be used with a cellular network provider sim card.

...

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully before beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.
Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.

...

• Connect your computer to one of the Ethernet ports;
• Optional - Connect an external antenna antennas to the SMA connector (The antennas are not provided in the package, see "Antenna usage");
• Insert a micro SIM card into the slot located under the device;

...

• Connect the power adapter to the DC jack;
• Once the device is powered on and the PC is connected to the device, open httpshttp://192.168.88.1^{Image Removed} in  in your web browser to start the configuration;
• User name: admin and there is no password by default you will be logged in automatically to the Quick Set screen (or, for some models, check user and wireless passwords on the sticker);
• Update the device by clicking the (Check_for_updates) on the right side and updating your RouterOS software to the latest version. Must have a valid SIM card inserted;
• For a manual update of the device, visit visit the products page at https://mikrotik.com/download;
• Select the v7 ARM64-packages (routeros-x.x-arm64.npk, wifiwave2-x.x-arm64.npk) for this device and download them onto your PC;
• products to find your product. The required packages are accessible under the "Support&Downloads" menu;
• Upload downloaded packages to the (WebFig) (Files) menu and reboot the device;
• Updating Upload downloaded packages to the WebFig Files menu and reboot the device. By upgrading your RouterOS software to the latest version , you can ensure optimal will ensure the best performance, stability, and security updates;
• To personalize your wireless network, SSID can be changed in the fields "Network Name";
• In the (QuickSet) menu set up the following: Choose your country, to apply country regulation settings;
• Set up your wireless network password in the field "WiFi Password" the password must be at least eight symbols;
• Set up your router password in the bottom field "Password" to the right and repeat it in the field "Confirm Password", it will be used to login log in next time;
• Click on the "Apply Configuration" to save changes.

...

• Insert the SIM card and power on the device.
• Scan the QR code with your smartphone and choose your preferred OS.
• Connect to the wireless network. SSID starts with MikroTik and has the last digits of the device's MAC address.
• Open application.
• By default, the IP address and user name will be already entered.
• Click Connect to establish a connection to your device through a wireless network.
• Choose Quick setup and the application will guide you through all basic configuration settings in a couple of easy steps.
• An advanced menu is available to fully configure all necessary settings.

...

The device is designed to be used indoors, by placing it on the desktop.

...

1. Wireless network activity.
2. Ethernet port activity.
3. System LED.
4. LTE signal Signal strength.

SIM slot usage

SIM card slot is designed to use be used with Micro SIM cards.
Nano SIM cards have different thicknesses and usage with an adapter is not recommended.

...

• Hold this button during boot time until the LED light starts flashing, and release the button to reset the RouterOS configuration (total 5 seconds).
• Keep holding for 5 more seconds, the LED turns solid, release now to turn on CAP mode. The device will now look for a CAPsMAN server (total of 10 seconds).
• Or Keep holding the button for 5 more seconds until the LED turns off, then release it to make the RouterBOARD look for Netinstall servers.

...

Accessories

The package includes the following accessories that come with the device:

• EU/US Switching Power Supply 24 V ⎓, 1.2 A.
• CAT5E UTP Flat Cable, 8P8C, AWG32, 1.5m, Black color

LTE Antenna usage

The device has two external antenna connectors on the back behind the doors.

...

The device supports RouterOS software version v7.6 and higher. The additional package wifiwave2-x.x-arm64.npk must be installed. required packages are accessible under the "Support&Downloads" menu. The specific factory-installed version number is indicated in the RouterOS menu /system resource. Other operating systems have not been tested.

Federal Communication Commission Interference Statement

UKCA marking             

Image Added

CE Declaration of Conformity

Image Removed

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance.

WLAN/WCDMA/LTE 

Image Added