Chateau LTE6 ax (S53UG+5HaxD2HaxD-TC&FG621-EA)

The Chateau is a home router to be used with a cellular network provider sim card.

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.
Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.

Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the general public.

Quickstart

Please follow these quick steps to set up your device:

• Connect your computer to one of the Ethernet ports;
• Optional - Connect external antennas to the SMA connector (The antennas are not provided in the package, see "Antenna usage");
• Insert a micro SIM card into the slot located under the device;

• Connect the power adapter to the DC jack;
• Once the device is powered on and the PC is connected to the device, open http://192.168.88.1 in your web browser to start the configuration;
• User name: admin and there is no password by default you will be logged in automatically to the Quick Set screen (or, for some models, check user and wireless passwords on the sticker);
• Update the device by clicking the (Check_for_updates) on the right side and updating your RouterOS software to the latest version. Must have a valid SIM card inserted;
• For a manual update of the device, visit the products page at https://mikrotik.com/products to find your product. The required packages are accessible under the "Support&Downloads" menu;
• Upload downloaded packages to the (WebFig) (Files) menu and reboot the device;
• Updating your RouterOS software to the latest version will ensure the best performance, stability, and security updates;
• To personalize your wireless network, SSID can be changed in the fields "Network Name";
• In the (QuickSet) menu set up the following: Choose your country, to apply country regulation settings;
• Set up your wireless network password in the field "WiFi Password" the password must be at least eight symbols;
• Set up your router password in the bottom field "Password" to the right and repeat it in the field "Confirm Password", it will be used to log in next time;
• Click on the "Apply Configuration" to save changes.

Connecting with a mobile app

Use your smartphone to access your router through WiFi.

• Insert the SIM card and power on the device.
• Scan the QR code with your smartphone and choose your preferred OS.
• Connect to the wireless network. SSID starts with MikroTik and has the last digits of the device's MAC address.
• Open application.
• By default, the IP address and user name will be already entered.
• Click Connect to establish a connection to your device through a wireless network.
• Choose Quick setup and the application will guide you through all basic configuration settings in a couple of easy steps.
• An advanced menu is available to fully configure all necessary settings.

Specifications

• Product code S53UG+5HaxD2HaxD-TC&FG621-EA
• CPU Quad-Core IPQ-6010 1.8 GHz
• CPU architecture ARM 64bit
• CPU core count 4
• Size of RAM 1 GB
• RAM type DDR3L
• Storage 128 MB, NAND
• Number of 1G Ethernet ports 4
• Number of 2.5G Ethernet ports 1
• USB 1 USB 2.0 port type A
• Switch chip model IPQ-6010
• Wireless 2.4 GHz 802.11b/g/n/ax dual-chain, 5 GHz 802.11a/n/ac/ax dual-chain
• Wireless antenna max gain 2.4 GHz - 2 dBi, 5 GHz - 4 dBi
• Antenna beam width 360°
• LTE category 6 (300Mbit/s Downlink, 50Mbit/s Uplink)
• LTE modem FG621-EA
• TAC 86335904
• MIMO DL 2x2
• MIMO UL 1x1
• LTE FDD bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800MHz) / 28 (700MHz)
• 3G Category R8 (42.2Mbps Downlink, 11.2Mbps Uplink)
• 3G Bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz)
• Dimensions 240 x 156 x 44 mm
• Operating system RouterOS v7, License level 4
• Operating temperature -40°C to +70°C

Mounting

The device is designed to be used indoors, by placing it on the desktop.

Powering

The device accepts power from an adapter:

• Direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive plug) 12-28 V DC⎓.

The power consumption under maximum load can reach 13 W, with attachments 17 W.

Configuration

We recommend checking for updates frequently to receive the latest updates for your RouterOS software to ensure the best performance and stability.
RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to the possibilities: https://mt.lv/help. In case IP connection is not available, the Winbox tool (https://mt.lv/winbox) can be used to connect to the MAC address of the device from the LAN side (all access is blocked from the Internet port by default).
For recovery purposes, it is possible to boot the device for reinstallation, see the section Buttons and Jumpers.

Mode button

The Mode button is located on the back of the unit, to the right side (see "Expansion slots and ports")
The Default configuration for the Mode button is dark mode - to turn off all LEDs. The button can be configured in RouterOS to run any user-specified scripts.

Sync button

The Sync button is located on the top of the unit. The WPS Sync button, if configured on the wireless interface, can be used to connect new clients.

• Press and hold the WPS button for 1 – 5 seconds to enable WPS for wireless interfaces.

Front LED status

1. Wireless network activity.
2. Ethernet port activity.
3. System LED.
4. Signal strength.

SIM slot usage

SIM card slot is designed to be used with Micro SIM cards.
Nano SIM cards have different thicknesses and usage with an adapter is not recommended.

Reset button

The reset button has three functions:

• Hold this button during boot time until the LED light starts flashing, and release the button to reset the RouterOS configuration (total 5 seconds).
• Keep holding for 5 more seconds, the LED turns solid, release now to turn on CAP mode. The device will now look for a CAPsMAN server (total of 10 seconds).
• Or Keep holding the button for 5 more seconds until the LED turns off, then release it to make the RouterBOARD look for Netinstall servers.

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery.

Accessories

The package includes the following accessories that come with the device:

• EU/US Switching Power Supply 24 V ⎓, 1.2 A.
• CAT5E UTP Flat Cable, 8P8C, AWG32, 1.5m, Black color

LTE Antenna usage

The device has two external antenna connectors on the back behind the doors.

• Open doors by pulling them upwards.
• Screw the LTE antenna to the SMA connector located on the left side. The maximum diameter for antenna connectors or any other adapters used is 13 mm.

Operating system support

The device supports RouterOS software version v7.6 and higher. The required packages are accessible under the "Support&Downloads" menu. The specific factory-installed version number is indicated in the RouterOS menu /system resource. Other operating systems have not been tested.

UKCA marking             

CE Declaration of Conformity

WLAN/WCDMA/LTE