...

SXT LTE kit-US

SXT LTE kit

SXT LTE6 kit (2023)

The SXT kit comes as a complete set and includes a built-in modem, connected to a built-in antenna. It has two 10/100 Ethernet connectors that support MDI-X auto-detection. There are two micro SIM card slots available, to switch between cell providers.

...

First use

1. Open the bottom lid.
2. The IMEI number can be found on the case and packaging labels.
3. Insert the SIM cards into the micro-SIM slots (SIM A slot is a default).
   If using another slot, the configuration can be changed in RouterOS with the CLI command:
   /system routerboard modem set sim-slot=down
   After changing SIM slots, the LTE modem will be restarted. It can take some time (depending on the modem and board around 30 seconds) to fully initialize it, so make sure you test your modem.
   https://wikihelp.mikrotik.com/wikidocs/display/ROS/Dual_+SIM_+Application
4. Connect the device to the power source (see "Powering").
5. Once the device is powered on and the PC is connected to the device, open httpshttp://192.168.188.1 in your web browser or Winbox to start the configuration.
6. User name: admin and there is no password by default you will be logged in automatically to the Quick Set screen (or, for some models, check user and wireless passwords on the sticker).
7. We recommend clicking the "Check for updates" button on the right side and updating your RouterOS software to the latest version to ensure the best performance and stability. Must have an internet connection and a valid SIM card.
8. To manually update the device, please go to our web page and download the latest (MIPSBE) software packages to your PC.
9. Open the Web browser or Winbox and upload packages to the Files menu and reboot the device.
10. Set up your router password in the bottom field "Password" to the right and repeat it in the field "Confirm Password", it will be used to log in next time.

11. Click on the "Apply Configuration" to save changes.

Mounting

Mounting

SXT is designed SXT is designed to be mounted on the pole, the package includes a mounting bracket and steel clamp.

...

The power consumption under maximum load can reach 5 W, with attachments 22 W.
Connecting to a PoE Adapter:

1. Connect the Ethernet cable from Use an ethernet cable to connect the device to the PoE out (PoE+DATA or Data+Power) port of the PoE adapter;
2. Connect an Ethernet cable from your local network (LAN) to the PoE adapter;
3. .
4. Plug the PoE adapter RJ45 connector into your local router, switch, or computer ethernet port.
5. Connect the PSU DC plug into the PoE adapter, then connect PSU to the AC power sourceConnect the power cord to the adapter, and then plug the power cord into a power outlet.

Configuration

Once logged in, we recommend clicking the "Check for updates" button in the QuickSet menu, as updating your RouterOS software to the latest version ensures the best performance and stability. For wireless models, please make sure you have selected the country where the device will be used, to conform to local regulations.
RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to the possibilities: https://mt.lv/help. In case IP connection is not available, the Winbox tool (https://mt.lv/winbox) can be used to connect to the MAC address of the device from the LAN side (all access is blocked from the Internet port by default).
For recovery purposes, it is possible to boot the device for reinstallation, see a section Reset button.

...

• Two Ethernet ports that support automatic cross/straight cable correction (Auto MDI/X), so you can use either straight or cross-over cables for connecting to other network devices.
• The ETH2 port is capable of powering another RouterBOARD device with passive PoE (up to 57 V). The maximum output current is 600 mA when using less than 30 V to power this device and 400 mA when using more than 30 V.
• MiniPSIe slot.
• Two micro SIM slots.
• Integrated LTE module, supported bands depend on a region (check brochure).

SIM slot usage

Image Added

SIM card slot is designed to be used with Micro SIM cards.
Nano SIM cards have different thicknesses and usage with an adapter is not recommended.

Reset Reset button

The reset button has three functions:

...

The device supports RouterOS software version 67. The specific factory installed-version number is indicated in the RouterOS menu /system resource. Other operating systems have not been tested.. Other operating systems have not been tested.

To troubleshoot any issues, visit the page provided and navigate to the dedicated troubleshooting section for detailed guidance and solutions: Troubleshooting articles

Federal Communication Commission Interference Statement

...

Для получения подробных сведений о гарантийном обслуживании обратитесь к продавцу. Информация об импортерах продукции MikroTik в Российскую Федерацию:https://mikrotik.com/buy/europe/russia

Продукты MikroTik, которые поставляются в Евразийский таможенный союз, оцениваются с учетом соответствующих требований и помечены знаком EAC, как показано ниже:

...

Fabricante: Mikrotikls SIA, Brivibas gatve 214iUnijas iela 2, Riga, LV-1039, Latvia.

País De Origen: Letonia; Lituania; China (Republica Popular); Estados Unidos De America; Mexico.

...

The National Commission for the State Regulation of Communications and Informatization by Ukraine

Виробник: Mikrotikls SIA, Brivibas gatve 214i , Unijas iela 2, Рига, Латвія, LV1039.

...

Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Unijas iela 2, Riga, Latvia, LV1039.

Hereby, Mikrotīkls SIA declares that the radio equipment type RouterBOARD is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://mikrotik.com/products

...