Versions Compared

Old Version 1

changes.mady.by.user Oskars K.

Saved on

compared with

New Version Current

changes.mady.by.user Serhii T.

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Make sure your ISP is allowing hardware change and will automatically issue an IP address.
  • Connect your ISP cable to the first Ethernet port.
  • Connect your PC to any of the Ethernet ports.
  • Connect the device to the power source.
  • Use a Web browser or WinBox to connect to the default IP address of 192.168.88.1 from any port, with the username admin and no password (or, for some models, check user and wireless passwords on the sticker).
  • If IP is not available, download WinBox from our webpage and use it to connect through MAC address.
  • Update RouterOS software to the latest version, and make sure that the device has an internet connection.
  • If the device does not have an internet connection update software by downloading the latest version from our webpage https://mikrotik.com/download
  • Find the latest software and choose your packages.
  • To get the architecture type of your device model, open WinBox, WebFig go to (System/Resources).
  • Download packages to the PC and upload them to the WinBox, WebFig, (Files) menu, and reboot the device.
  • Set up your password to secure the device.

...

The power consumption under maximum load can reach 150 W. The device accepts power from the power jack, 2-pin terminal, or from the any Ethernet port:

  • Direct-input power jack (5.5 mm outside and 2 mm inside, female, pin-positive plug) accepts 24-57 V DC.
  • The First Ethernet port accepts ports accept Power over Ethernet 24-57 V DC, 802.3af/at - 802.3af/at (ether1), Mode B (ether2-ether8).
  • 2-pin terminal input Voltage 24-57 V DC.
  • PoE-Out ports Ether1 - Ether8, max out per port output (input < 30 V): 640 mA, max out per port output (input > 30 V): 420 mA.
  • Max total out 2.59 A.
  • Total output power 130 W.
  • Total output current 2.28 A.

Mode B: Ethernet port 2 - 8.
Pins 4 & 5 = DC+
Pins 7 & 8 = DC-

Connecting to a POE Adapter:

...

The device supports RouterOS software version 7 and higher. 4.1. The specific factory-installed version number is indicated in the RouterOS menu /system resource. Other operating systems have not been tested.

...

UKCA marking                         

(EN) Technical Specifications / (DE) Technische Spezifikationen / (FR) Spécifications techniques / (IT) Specifiche tecniche / (ES) Especificaciones técnicas / (RU) Технические характеристики:

(EN) Product Power Input Options

(DE) Produkt Stromquellen Optionen
(FR) Options d'entrée d'alimentation du produit
(IT) Opzioni di ingresso alimentazione del prodotto
(ES) Opciones de entrada de energía del producto
(RU)

Варианты

Параметры входной мощности продукта

(EN) Power Adapter Output Specification 

(DE) Ausgangsspezifikationen des Gleichstromadapters
(FR) Spécifications de sortie de l'adaptateur de courant continu
(IT) Specifiche di uscita dell'adattatore di corrente continua
(ES) Especificaciones de salida del adaptador de corriente continua
(RU) Выходные характеристики адаптера постоянного тока

(EN) Degrees of protection provided by enclosure (IP Code)

(DE) IP-Klasse des Gehäuses
(FR) Classe IP du boîtier
(IT) Classe IP della custodia
(ES) Clase de IP del recinto
(RU) Класс защиты корпуса IP

(EN) Operating Temperature

(DE)Betriebstemperatur
(FR) température de fonctionnement
(IT) temperatura di esercizio
(ES) Temperatura de funcionamiento
(RU) Рабочая Температура

Voltage, VCurrent, A

DC Jack (24 - 57 V DC)

PoE In Ethernet Port (24 - 57 V DC)

2-pin terminal (24 - 57 V DC)


48 V


2 A


IP20


±0°..+60°C


Info
Information contained here is subject to change. Please visit the product page on www.mikrotik.com for the most up-to-date version of this document.

...