...
Features | Description |
---|---|
Forwarding |
|
Monitoring |
|
VLAN |
|
Security |
|
Quality of Service (QoS) |
|
Access Control List |
|
...
Property | Description |
---|---|
Enabled | Enable or disable port |
Name | Editable port name |
Link Status | Current link status (read-only) |
Auto Negotiation | Enable or disable auto-negotiation |
Speed | Shows the negotiated speed, or allows manually changing the speed setting of the port (requires auto-negotiation to be disabled) |
Full Duplex | Shows the negotiated duplex, or allows manually changing the duplex mode of the port (requires auto-negotiation to be disabled) |
Hops | Shows the number of GPER repeaters in the link |
Last Hop | Shows the number of the last GPER repeater if the link is terminated |
Length | Shows the length of the cable in meters if the link is terminated |
Fault At | Shows the distance in meters to the failure point if the cable is damaged but the link is active |
Cable Pairs | Shows four positions of the cable pairs with their status: O - open; S - short.; P - reverse polarity |
Info |
---|
The device supports Jumbo frames up to 10222 bytes. Manually decreasing the MTU settings is not supported for SwOS Lite devices. |
...
SwOS supports SNMP v1 and v2c (the Response for GetRequest, GetNextRequest and GetBulkRequest) and uses IF-MIB, SNMPv2-MIB, BRIDGE-MIB and MIKROTIK-MIB (only for health, PoE-out and SFP diagnostics). SNMP traps and writing SwOS configuration are not supported.
Available SNMP data:
- System information
- System uptime
- Port status
- Interface statistics
- Host table information
...