...
| Code Block | ||
|---|---|---|
| ||
/interface bridge
add name=bridge1
/interface bridge port
add bridge=bridge1 interface=ether2 hw=yes
add bridge=bridge1 interface=ether6 hw=yes learn=no unknown-unicast-flood=no
add bridge=bridge1 interface=ether7 hw=yes learn=no unknown-unicast-flood=no
/interface ethernet switch unicast-fdb
add mac-address=4C:5E:0C:00:00:01 port=ether6 svl=yes
add mac-address=D4:CA:6D:00:00:02 port=ether7 svl=yes
/interface ethernet switch acl
add action=drop src-mac-addr-state=sa-not-found src-ports=ether6,ether7 table=egress
add action=drop src-mac-addr-state=static-station-move src-ports=ether6,ether7 table=egress |
CRS1xx/2xx switches also allow to learn one dynamic MAC per port to ensure only one end-user device is connected no matter its MAC address:
...