...
| Property | Description |
|---|---|
| address (Address/Netmask; Default: ) | Ipv6 address. Allowed netmask range is 0..128. Address can also be constructed from the pool if from-pool property is specified. For example if address is set to ::1/64 then address will be constructed as follows <prefix_from_pool>::1/64 |
| advertise (yes | no; Default: no) | Whether to enable stateless address configuration. The prefix of that address is automatically advertised three times to hosts using ICMPv6 protocol. The option is set by default for addresses with prefix length 64. If address is removed or changed, then old prefix will be deprecated by automatically advertising the old prefix with lifetime set to "0s" three times to hosts using ICMPv6 protocol |
| comment comment (string; Default: ) | Descriptive name of an item |
| disabled (yes | no; Default: no) | Whether address is disabled or not. By default it is not disabled |
| eui-64 (yes | no; Default: no) | Whether to calculate EUI-64 address and use it as last 64 bits of the IPv6 address. |
| from-pool (string; Default: ) | Name of the pool from which prefix will be taken to construct IPv6 address taking last part of the address from address property. |
| no-dad (yes | no; Default: no) | If set indicates that address is anycast address and Duplicate Address Detection should not be performedenabled (yes) - disables Duplicate Address Detection (DAD) for IPv6 addresses on an interface. This can be useful in scenarios where you want to assign static IPv6 addresses to devices and avoid the delay caused by DAD. |
| interface (string; Default: ) | Name of an interface on which Ipv6 address is set. |
...