Versions Compared

Old Version 12

changes.mady.by.user Guntis G.

Saved on

compared with

New Version 13

changes.mady.by.user Edgars P.

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Code Block
languageros
/interface bridge
set bridge priority=0x1000protocol-mode=mstp vlan-filtering=yes

When MSTP regions have been configured, you can check if they are properly configured by forwarding traffic, for example, send tagged traffic from the first device to the third device and change the VLAN ID for the tagged traffic to observe different paths based on VLAN ID. When this is working as expected, then you can continue to configure CIST related parameters to elect a CIST root bridge and CIST root ports. For consistency we will choose the first device in the first region to be the CIST root bridge and to ensure the consistency in case of failure we can set a higher priority to all other bridges.

...