...
Property | Description |
---|---|
advertise-dns (yes | no; Default: no) | Option to redistribute DNS server information using RADVD. You will need a running client-side software with Router Advertisement DNS support to take advantage of the advertised DNS information. Read more >> |
advertise-mac-address (yes | no; Default: yes) | When set, the link-layer address of the outgoing interface is included in the RA. |
comment (string; Default: ) | Descriptive name of an item |
dns-servers (unspecified | ipv6 addresses; Default: unspecified) | Specify a single IPv6 address or list of addresses that will be provided to hosts for DNS server configuration. |
disabled (yes | no; Default: no) | Whether an item is disabled or not. By default, entry is enabled. |
hop-limit (unspecified | integer[0..255]; Default: unspecified) | The default value that should be placed in the Hop Count field of the IP header for outgoing (unicast) IP packets. |
interface (all | string; Default: ) | The interface on which to run neighbor discovery.
|
managed-address-configuration (yes | no; Default: no) | The flag indicates whether hosts should use stateful autoconfiguration (DHCPv6) to obtain addresses. |
mtu (unspecified | integer[0..4294967295]; Default: unspecified) | The MTU option is used in router advertisement messages to insure that all nodes on a link use the same MTU value in those cases where the link MTU is not well known.
|
other-configuration (yes | no; Default: no) | The flag indicates whether hosts should use stateful autoconfiguration to obtain additional information (excluding addresses). |
pref64-prefixes (unspecified | ipv6 prefixes; Default: unspecified) | Specify IPv6 prefix or list of prefixes within /32, /40. /48, /56, /64, or /96 subnet that will be provided to hosts as NAT64 prefixes. |
ra-delay (time; Default: 3s) | The minimum time allowed between sending multicast router advertisements from the interface. |
ra-interval (time[3s..20m50s]-time[4s..30m]; Default: 3m20s-10m) | The min-max interval allowed between sending unsolicited multicast router advertisements from the interface. |
ra-preference (low | medium | high; Default: medium) | Specify the router preference that is communicated to IPv6 hosts through router advertisements. The preference value in the router advertisements enables IPv6 hosts to select a default router to reach a remote destination |
ra-lifetime (none | time; Default: 30m) | Sets the RA lifetime. |
reachable-time (unspecified | time[0..1h]; Default: unspecified) | The time that a node assumes a neighbor is reachable after having received a reachability confirmation. Used by the Neighbor Unreachability Detection algorithm (see Section 7.3 of RFC 2461) |
retransmit-interval (unspecified | time; Default: unspecified) | The time between retransmitted Neighbor Solicitation messages. Used by address resolution and the Neighbor Unreachability Detection algorithm (see Sections 7.2 and 7.3 of RFC 2461) |
...