Versions Compared

Old Version 6

changes.mady.by.user Oskars K.

Saved on

compared with

New Version 7

changes.mady.by.user Oskars K.

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Directly connect the Ethernet port of the device to the PC.
  2. Both devices are on the same subnet.
  3. Disable the Windows firewall.
  4. Disable any antivirus programs.
  5. Make sure you press the reset button correct correctly to bring the device to the Netinstall state.

...

Panel
bgColor#fff
titleNo success? Other things to try:
  1. Disable all other interfaces on the PC leaving only the one connected to the device;
  2. Run netinstall.exe as administrator;
  3. Make sure the connection in Windows is set to Private;
  4. A fixed IP address;
  5. Win7 set compatibility mode for netinstall.exe to XPSP3;
  6. Try different Ethernet cablecables;
  7. Set parameter: System > Routerboard > Settings >Boot Device "try-ethernet-once-then-nand;
  8. Enable NetBIOS over TCP/IP.
  9. Have Having the device connected through a switch to the computer, in rare cases, this can help to bypass hardware incompatibility.


Info

Issue: After clicking the Install button, the status shows "ready" without performing the reinstallation process.

Solution: Restart the Netinstall application, if not helping restart your OS.


Info

Issue: After pressing the reset button on the device and powering it on, the device is not showing up on Netinstall.

Solution: Press the reset button right after delivering power to the device. In this case, the backup bootloader will not be forced - in case it's damaged.

Content by Label
showLabelsfalse
max5
spacesRKB
showSpacefalse
sortmodified
reversetrue
typepage
cqllabel in ("work","dont","netinstall") and type = "page" and space = "RKB"
labelsNetinstall dont work

...