...
In order to set up port switching on CRS1xx/2xx series switches, check the Bridge Hardware Offloading page.
| Warning |
|---|
It is possible to create multiple isolated switch group by using multiple bridges with enabled hardware offloading, this is possible only on CRS1xx/2xx series switches. For more complex setups (for example, VLAN filtering) you should use the port isolation feature instead. |
...
| Note |
|---|
For CRS3xx series devices, you must use bridge VLAN filtering, you can read more about it in the Bridge VLAN Filtering section. |
Example 1 (Trunk and Access ports)
...