...
Property | Description | |
---|---|---|
active (yes | no) | A flag indicates whether the route is elected as Active and eligible to be added to the FIB. | |
afi (ip4 | ip6 | link) | Address family this route belongs to. | |
belongs-to (string) | Descriptive info showing from where the route was received. | |
bgp (yes | no) | A flag indicates whether this route was added by the BGP protocol. | |
bgp - a group of parameters associated with the BGP protocol | ||
.as-path(string) | value of the AS_PATH BGP attribute | |
.aggregator (string) | ||
.atomic-aggregate (yes | no) | ||
.cluster-list (string) | ||
.communities (string) | value of the COMMUNITIES BGP attribute | |
.ext-communities (string) | value of the EXTENDED_COMMUNITIES BGP attribute | |
.igp-metric(string) | value of the IGP_METRIC BGP attribute | |
.large-communities (string) | value of the LARGE_COMMUNITIES BGP attribute | |
.local-pref (string) | value of the LOCAL_PREF BGP attribute | |
.med (string) | value of the MED BGP attribute | |
.nexthop (string) | ||
.origin (string) | ||
.originator-id (string) | ||
.out-nexthop(string) | ||
.peer-cache-id (string) | The ID of the BGP session that installed the route. See /routing/bgp/session menu. | |
.unknown (string) | hex blob of unknown BGP attributes | |
.weight (string) | ||
blackhole (yes | no) | A flag indicates whether it is a blackhole route | |
check-gateway (ping | arp | bfd) | Currently used check-gateway option. | |
comment (string) | ||
connect (yes | no) | A flag indicates whether it is a connected network route. | |
contribution (string) | Shows the route status contributing to the election process, e.g "filtered, active, candidate" | |
copy (yes | no) | A flag indicates a copy of the route to be redistributed as the L3VPN route. VPNv4/6 related attributes are attached to this "copy" route. | |
create-time (string) | ||
debug - a group of debugging parameters | ||
dhcp (yes | no) | A flag indicates whether the route was added by the DHCP service. | |
disabled (yes | no) | A flag indicates whether the route is disabled. | |
distance (integer) | ||
dst-address (prefix) | Route destination. | |
ecmp (yes | no) | A flag indicates whether the route is added as an Equal-Cost Multi-Path route in the FIB. Read more>> | |
filtered (yes | no) | A flag indicates whether the route was filtered by routing filters and excluded from being used as the best route. | |
gateway (string) | Configured gateway, for the actually resolved gateway, see immediate-gw parameter. | |
hw-offloaded (yes | no) | Indicates whether the route is eligible to be hardware offloaded on supported hardware. | |
immediate-gw (string) | Shows actual (resolved) gateway and interface that will be used for packet forwarding. Displayed in format [ip%interface] . | |
label (integer) | ||
ldp-address (yes | no) | A flag indicates whether the route entry is an LDP address. | |
ldp-mapping (yes | no) | A flag indicates whether the route entry is the LDP mapping | |
ldp - a group of parameters associated with the LDP protocol | ||
.label (integer) | LDP mapped MPLS label. | |
.peer-id () | ||
local-address (IP) | Local IP address of the connected network. | |
modem (yes | no) | A flag indicates whether the route is added by the LTE or 3g modems. | |
mpls - group of generic parameters associated with the MPLS | ||
.in-label () | Mapped MPLS ingress label | |
.labels () | ||
.out-label () | Mapped MPLS egress label | |
nexthop-id () | ||
ospf (yes | no) | A flag indicates whether the route was added by the OSPF routing protocol. | |
ospf - group of parameters associated with the OSPF protocol | ||
.metric (integer) | ||
.type (string) | ||
pref-src () | ||
received-from () | ||
rip (yes | no) | A flag indicates whether the route was added by the RIP routing protocol | |
rip - group of parameters associated with the RIP protocol | ||
.metric () | ||
.route-tag () | ||
route-cost () | ||
routing-table () | Routing table this route belongs to. | |
rpki (valid | invalid | unknown) | Current status of the prefix from the RPKI validation process. | |
scope (integer) | Scope used in the next-hop lookup process. Read more>> | |
static (yes | no) | A flag indicates statically added routes. | |
target-scope (integer) | Target scope used in next-hop lookup process. Read more>> | |
te-tunnel-id () | Traffic Engineering tunnel ID | |
total-cost () | ||
unreachable (yes | no) | A flag indicates whether the route next-hop is unreachable. | |
update-time () | ||
ve-block-offset | ||
ve-block-size | ||
ve-id | ||
vpn (yes | no) | A flag indicates whether the route was added by one of the VPN protocols (PPPoE, L2TP, SSTP, etc.) | |
vrf-interface () | Internal use only parameter which allows identifying to which VRF route should be added. Used by services that add routes dynamically, for example, DHCP client. Shown for debugging purposes. |
...