Summary

Application Programmable Interface (API) allows users to create custom software solutions to communicate with RouterOS to gather information, adjust the configuration, and manage the router. API closely follows syntax from the command-line interface (CLI). It can be used to create translated or custom configuration tools to aid ease of use in running and managing routers with RouterOS.

API service must be enabled before trying to establish the API connection. By default, API uses TCP:8728 and TCP:8729 (secure). 

Protocol

API-SSL service is capable of working in two modes - with and without a certificate. In the case no certificate is used in /ip service settings then an anonymous Diffie-Hellman cipher has to be used to establish a connection. If a certificate is in use, a TLS session can be established.

Protocol

Communication with the router is done by sending sentences and receiving one or more sentences in return. A sentence is a sequence of words terminated by zero-length words. Word is part of a sentence encoded in a certain way - encoded length and data. Communication happens by sending sentences to the router and receiving replies to sent sentences. Each sentence sent Communication with the router is done by sending sentences and receiving one or more sentences in return. A sentence is a sequence of words terminated by zero-length words. Word is part of a sentence encoded in a certain way - encoded length and data. Communication happens by sending sentences to the router and receiving replies to sent sentences. Each sentence sent to the router using API should contain a command as a first word followed by words in no particular order, the end of the sentence is marked by a zero-length word. When the router receives a full sentence (command word, no or more attribute words, and zero-length word) it is evaluated and executed, then a reply is formed and returned.

...

Words are part of a sentence. Each word has to be encoded in a certain way - the length of the word followed by the word content. The length of the word should be given as a count of bytes that are going to be sent.

Length The length of the word is encoded as follows:

• Each word is encoded as length, followed by that many bytes of content;
• Words are grouped into sentences. End The end of a sentence is terminated by a zero-length word;
• The scheme allows encoding of length up to 0x7FFFFFFFFF, only four-byte length is supported;
• len bytes are sent most significant first (network order);
• If the first byte of the word is >= 0xF8, then it is a reserved control byte. After receiving an unknown control byte API client cannot proceed, because it cannot does not know how to interpret the following bytes;
• Currently, control bytes are not used;

...

The first word in the sentence has to be a command followed by attribute words and a zero-length word or terminating word. The name of the command word should begin with '/'. Names of commands closely follow CLI, with spaces replaced with '/'. There Some commands are commands that are specific to API;

Command word structure in the strict order:

• encoded length
• content prefix /
• CLI converted command

API-specific commands:

login
cancel

...

Attribute word

Each command word has its own list of of attribute words depending on content.

...

• encoded length
• content prefix equals sign - =
• attribute name
• separating equals sign - =
• value of an attribute if there is one. It is possible that the attribute does not have a value

...

...

...

Reply word

It is only sent only by the router . It is only sent in response to the full sentence send by received from the client.

• The first word of reply begins with '!';
• Each sentence sent generates at least one reply (if a connection does not get terminated);
• The last reply for every sentence is the reply that has the first word !done;
• Errors and exceptional conditions begin with !trap;
• Data replies begin with !re
• If the API connection is closed, RouterOS sends sends !fatal with a reason as a reply and then closes the connection;

...

• Empty sentences are ignored.
• A sentence is processed after receiving zero length word.
• There is a limit on the number and size of sentences that the client can send before it has logged in.
• Order of attribute words should not be relied on. As order and count are changeable by .proplist attribute.
• Sentence The sentence structure is as follows:
  • The first word should contain a command word;
  • Should contain zero-length word to terminate the sentence;
  • Can contain none or several attribute words. There is no particular order at in what attribute words have to be sent in the sentence, order is not important for attribute words;
  • Can contain none or several query words. The order of query words in the sentence is important.

...

Note: that each command and response ends with an empty word.

Login method post-v6.43:

• Now the client sends a username and password in the first message.
• Password is sent in plain text.
• in case of an error, the reply contains =message=error message.
• In case of a successful login, the client can start to issue commands.

...

• It is possible to run several commands simultaneously, without waiting for the previous one to complete. If the API client is doing this and needs to differentiate command responses, it can use the 'tag' API parameter in command sentences.
• If you include the 'tag' parameter with a non-empty value in the command sentence, then the 'tag' parameter with exactly the same value will be included in all responses generated by this command.
• If you do not include the 'tag' parameter or its value is empty, then all responses for this command will not have a 'tag' parameter.

...

• /cancel
  • optional argument: =tag=tag of command to cancel, without it, cancels all running commands
  • does not cancel itself
  • all canceled commands are interrupted and in the usual case generate '!trap' and '!done' responses
  • please note that /cancel is separate command and can have it's its own unique '.tag' parameter, that is not related to '=tag' argument of this command

• listen
  • listen command is available where console print command is available, but it does not have the expected effect everywhere (i.e. may not work)
  • "!re" sentences are generated as something changes in a particular item list
  • when an item is deleted or disappears in any other way, the '!re' sentence includes the value '=.dead=yes'
  • This command does not terminate. To terminate it, use /cancel command.

...

• print
  • API print command differs from the console counterpart in the following ways:
    • where an argument is not supported. Items can be filtered using query words (see below).
    • .proplist argument is a comma-separated list of property names that should be included for the returned items.
      • returned items may have additional properties.
      • order of returned properties is not defined.
      • if a list contains duplicate entries, handling of such entries is not defined.
      • if a property is present in ".proplist", but absent from the item, then that item does not have this property value (?name will evaluate to false for that item).
      • if ".proplist" is absent, all properties are included as requested by the print command, even those that have slow access time (such as file contents and performance counters). Thus the use of of .proplist is encouraged. The omission of .proplist may have a high-performance penalty if the "=detail=" argument is set.

...

• Query words begin with '?'.
• The order of query words is significant. A query is evaluated starting from the first word.
• A query is evaluated for each item in the list. If the query succeeds, the item is processed, if a query fails, the item is ignored.
• A query is evaluated using a stack of boolean values. Initially, the stack contains an infinite amount of 'true' values. At the end of the evaluation, if the stack contains at least one 'false' value, the query fails.
• Query words operate according to the following rules:

...

The print command can return OID values for properties that are available in SNMP. 

In the console, OID values can be seen by running the 'print oid' command. In API, these properties have a name that ends with ".oid", and can be retrieved by adding their name to the value of '.proplist'. An example:

!trap

When for some reason API sentence fails trap is sent in return accompanied with by a message attribute and on some occasions category argument.

...

Command examples

/system/package/getall

/user/active/listen

/cancel, simultaneous commands

Example client

A simple API client in Python3

Example output:

debian@localhost:~/api-test$ ./api.py 10.0.0.1 admin ''
<<< /login
<<< 
>>> !done
>>> =ret=93b438ec9b80057c06dd9fe67d56aa9a
>>> 
<<< /login
<<< =name=admin
<<< =response=00e134102a9d330dd7b1849fedfea3cb57
<<< 
>>> !done
>>> 
/user/getall

<<< /user/getall
<<< 
>>> !re
>>> =.id=*1
>>> =disabled=no
>>> =name=admin
>>> =group=full
>>> =address=0.0.0.0/0
>>> =netmask=0.0.0.0
>>> 
>>> !done
>>> 

See also

API examples

API implementations in different languages, provided by different sources. They are not ordered in any particular order.

in the Wiki

• in PHP

• in Delphi #1
• in Delphi #2

• Swift
• in C #1
• in C #2
• in C using Winsock
• API in C++
• in C#

• in Flash Actionscript 3
• in Ruby on rails
• in VB .NET
• in java see java client on GitHub from Gideon LeGrange
• in NodeJS
• in RUST GPL v3
• in GO by andredossantos

on the MikroTik Forum

• in Perl by Hugh
• in Delphi by Rodolfo
• in Delphi #2 by Chupaka
• in NodeJS by Trakkasure
• in VB by lucho512
• on PHP for sparks framework by vthinkteam
• for Windows PowerShell by navidrasi

...

>>> 

See also

API examples

API implementations in different languages, provided by different sources. They are not ordered in any particular order.

• in Python3 by MikroTik
• in .NET (C#) high-level API solution forum thread additional info by danikf
• in PHP by boen_robot
• in C by Håkon Nessjøen
• in Java by Gideon LeGrange
• in Erlang by Valery Comtihon
• in GO by André Luiz dos Santos
• in Python3 by Arturs Laizans
• in C++17 by Ayman Al-Qadhi