...

First, the RouterBOOT loader is started. It displays boot information on the onboard RS232C asynchronous serial port. The serial port is set by default to 115200bit/s, 8 data bits, 1 stop bit, no parity.
The RouterOS system will then load. It will be also indicated by two beeps.
You can connect to the device with SSH, Winbox GUI or the web interface, by plugging your computer into port Ether1, and connecting to 192.168.88.1 user admin and no password (or, for some models, check user and wireless passwords on the sticker). The device doesn't have a DHCP server enabled by default, your PC should be configured with an address from this network.
More information on connecting to the device:+ https://mt.lv/help+^{Image Removed}

Extension slots and ports

• 13x Gigabit Ethernet ports, supporting automatic cross/straight cable correction (Auto MDI/X), so you can use either straight or cross-over cables for connecting to other network devices. ETH13 port accepts PoE power, and can be used to boot the device from the network for reinstalling with the Netinstall utility (see documentation)
• DB9 RS232C asynchronous serial port
• microSD slot
• 2x M.2 slots, accepting SATA type M.2 SSD disks in 2280 form factor (only Dx4 model)
• 2x 2.5 inch SATA connectors, accepting standard 2.5" SATA HDD disks (only Dx4 model)

...