...
This article describes supported add-on peripherals for RouterBOARD hardware devices.
Model | vendor-id | device-id | Tested RouterOS version | Comments | Format |
---|
Alcatel IK40 |
|
| v6.41RC11 |
Model | Tested RouterOS version | Comments | Format | Passthrough support | Technologies |
---|
Alcatel IK40 | v6.41RC11 | LTE interface, Modem can be configured only through modems configuration WEB page. | USB | N | LTE |
Alcatel IK41 | v6.48 | Config-less LTE interface | USB |
N | LTE | Alcatel IK41 |
|
| v6.48 | Config-less LTE interface | USB |
Android usb tethering interface |
|
| v6.7 |
Some settings are ignored.Config-less LTE interface | USB |
?LTE | AnyData ADU-E630WH |
|
| v6 | ( aka "USB Wireless HSDPA/UMTS 2.1GHz GSM/GPRS/EGPRS 900/17000MHz/CDMA 1x EVDO Rev.A") | USB |
3G |
Anteniti 3372h-153 |
|
| 7.12 |
| USB |
BandRich C501 |
|
| v5.25 and v6.0 |
| USB |
?LTE | D-link DWM-157 | 0x2001 | 0x7d02 | v6.xx | Works! Data Channel: 2, Info Channel: 3,Modem Init: AT+CFUN=1, vendor-id="0x2001" device-id="0x7d02" Some info from modem: > H/W Ver.: B1, F/W Ver.: 2.0.1eu, revision: +CGMR: MOLY.WR8.W1231.DC.WG.MP.V3, 2013/04/09 02:08 Different HW revisions might not work with RouterOS | USB |
3G | D-link DWM-222 |
|
| v6.38 | Multiple modem versions with the same marketing name exist, only H/W ver: A1 supported as config-less LTE interface | USB |
N | Dell DW5821e |
|
| v7.4beta4 and higher | MBIM driver. Revision: T77W968.F1.0.0.5.2.VZ.013 044 | M.2 |
Dell DW5821e-eSIM | 0x413c | 0x81e0 | 7.11 and higher | MBIM driver. FW: T77W968.F1.0.0.5.2. |
VZ 044 . "at-chat" support added | M.2 |
3G,LTE | Dell Wireless 5530 HSPA |
|
| v6.1 and higher | Data channel 0, Info channel 0, init: AT+CFUN=1 (needs manualy change profile by command AT*ENAP=1,1) | MiniPCI-e |
3G | Ericsson F5521gw |
|
| v6.x and higher |
| MiniPCI-e |
3G |
Fibocom FM150-AE | 0x2cb7 | 0x0111 | v7.1beta5 | MBIM driver. Revision: 89603.1000.00.01.01.03 | M.2 |
3G, LTE, 5GFibocom FG621-EA | 0x2cb7 | 0x0a07 |
| MBIM LTE interface | mini-PCIe USB device |
Fibocom NL-952-EAU |
|
| v7.1beta5 | MBIM driver. Revision: 19600.7000.00.04.01.05 | M.2 |
3G, LTE | Marvell PXA1802 based modems | 0x1286 | 0x4e31 | v7.2.2 |
Vendorid=0x1286 deviceid=0x4e31 |
| mini-PCIe |
Huawei E153 |
|
| v6.31< and higher |
| USB |
3G |
Huawei E171 |
|
| v6.xx | Works! ppp interface, vendorid=0x12d1 deviceid=0x140c | USB |
3G | Huawei e3131 |
|
| v6.xx and higher | ppp interface | USB |
3G, E8372h, E8372h | 0x12d1 | 0x14db | v6.8 | Config-less LTE interface |
for modems with vendor-id="0x12d1" device-id="0x14db". Models with suffixes -320 and -608 will not work with RouterOS v6, please use v7 instead. Various customized variants were observed which does not provide LTE interface, but can be used in serial/PPP mode. | USB |
N | LTE | Huawei E3276-150 |
|
| v6.xx | ppp interface | USB |
? | LTE | Huawei E3351 |
|
| v6.24 and higher |
| USB |
3G | Huawei E3531 |
|
| v6.24 or 6.40RC25 | There are different versions of this modem E3531-6 works from version 6.40RC25 as ppp, mbim supported only from RouterOS V7 | USB |
3G | Huawei e398 |
|
| v6.xx and higher | ppp interface | USB |
LTE | Huawei E5377 |
|
| v6.36.1 | MIFI unit. No serial support, but works with IP on LTE interface | USB |
?LTE | LTE interface | USB | ? | LTE interface | USB |
Huawei K5160 |
|
| v6.37 v7.0beta6 | v6 and v7 - config-less LTE interface v7 - by default will try to use the modem in MBIM mode | USB |
N | Huawei K5161 |
|
| v6.47 | Config-less LTE interface | USB |
N |
Huawei ME909s-120 |
|
| v6.28 | Recommended modem firmware version 11.617.24.00.00 To reduce LTE interface IP subnet mask to /32 configure the modem with at-chat command: /interface lte at-chat [find] input="AT^CUSTFEATURE=3,1" | MiniPCI-e |
Y | LTE | |
Huawei ME909u-521 |
|
| v6.11 |
| MiniPCI-e |
Huawei MU609 |
|
| v6.11 |
| MiniPCI-e |
Huawei MU709s-2 |
|
| v6.28 |
| MiniPCI-e |
Huawei MS2372h-517 |
|
| v7.12beta3 | serial/PPP interface | USB |
Jaton MT421e |
|
| v6.40RC32 | config-less LTE interface |
Huawei ME909u-521 | v6.11N | LTE | Netgear Unite Explore 815S |
|
| v6.41 | MIFI unit. No serial support, but works with IP on LTE interface. | USB |
Novatel USB730L |
Huawei MU60911MiniPCI-e | ? | 3G | Huawei MU709s-2 | v6.28 | MiniPCI-e | Y | 3G | Jaton MT421e | v6.40RC32 | LTE interface with Ethernet emulation (no configuration possible), LTE supported bands 42/4341RC6 | LTE interface | USB |
Olivetti Olicard 500 |
|
| v6.41RC11 | ppp interface | USB |
Quectel EC20/EC21 |
|
| v6.xx | ppp interface, there is page in wiki about Quectel: article | MiniPCI-e |
?LTE | Netgear Unite Explore 815S41MIFI unit. No serial support, but works with IP on LTE interface. | USB | Y | LTE | Novatel USB730L | v6.41RC6 | LTE interface | USB | ? | LTE |
Olivetti Olicard 500 | v6.41RC11 | ppp interface | USB | ? | LTE |
Quectel EC20/EC21 | v6.xx | ppp 47 | Serial/PPP interface, single AT/modem channel=2 | OEM module |
Quectel BG95-M3 |
|
| v6.47 | Serial/PPP interface, single AT/modem channel=2 Will not work in wAP R ac boards. | mini-PCIe |
Quectel BG96 |
|
| v6.45 | Serial/PPP interface, 2x AT/modem channels | mini-PCIe |
Quectel EC25-EU | 0x2c7c | 0x0125 | v6.42 | ppp/LTE interface, there is page in wiki about Quectel ppp mode: article RouterOS v6 CDC-ECM mode - LTE interface receive address in modems internal network. RouterOS v7 MBIM mode - LTE interface uses APN IP address. | MiniPCI-e |
? | LTE | |
Quectel EG25-G | 0x2c7c | 0x0125 | 6.48.3 | RouterOS v6 CDC-ECM mode - LTE interface receives address in modem internal network. RouterOS v7 MBIM mode - LTE interface uses APN IP address. In some boards may be required to disable SIM hot plug detection: /interface lte set [find] modem-init="AT+QSIMDET=0,1" | MiniPCI-e |
Quectel EM12-G | 0x2c7c | 0x0512 | v7.1beta5 | MBIM LTE interface | m.2 |
Quectel EP06 |
Quectel BG77 | v6.47 | Serial/PPP interface, single AT/modem channel | OEM module | N | IoT |
Quectel BG95-M3 | v6.47 | Serial/PPP interface, single AT/modem channel Will not work in wAP R ac boards. | mini-PCIe | N | 2G/IoT |
Quectel BG96 | v6.45 | Serial/PPP interface, 2x AT/modem channels | mini-PCIe | N | 2G/IoT |
Quectel EC25 |
|
| v6.42 | ppp/LTE interface, there is page in wiki about Quectel |
ppp modeRouterOS v6 CDC-ECM mode - LTE interface receive address in modems internal network.
RouterOS v7 MBIM mode - LTE interface uses APN IP address.
MiniPCI-e | ? | LTE | Quectel EG25-G | 6.48.3 | RouterOS v6 CDC-ECM mode - LTE interface receive address in modems internal network. RouterOS v7 MBIM mode - LTE interface uses APN IP address. In some boards may be required to disable SIM hot plug detection: /interface lte set [find] modem-init="AT+QSIMDET=0,1" | MiniPCI-e | GSM, 3G, LTE | Quectel EM12-G | v7.1beta5 | MBIM driver | m.2 | Y | 3G,LTE |
Quectel EP06 | v6.42 | ppp/LTE interface, there is page in wiki about Quectel: article | MiniPCI-e | ? | LTE |
Quectel RM500Q-GL | v7.1beta6 | MBIM driver | m.2 | Y | 3G, LTE, 5G |
Quectel RM502Q-AE | v7.1beta5 | MBIM driver | m.2 | Y | 3G, LTE, 5G |
Quectel UC15 | v6.xx | Works, ppp interface | MiniPCI-e | 3G | Quectel UC20 | v6.xx | Works, ppp interface | MiniPCI-e | 3G | R11e-LTE | v6.39.2 | LTE interface. Supports multiple APN passthrough. | MiniPCI-e | Y | LTE |
Sierra Netgear AirCard 320U | 6.41 | Customer tested the modem with firmware 03.05.23 | USB | N | LTE |
Sierra wireless MC73xx | v6.xx(ppp) v7.xx (LTE) | Works! PPP interface. And starting with v7.xx it will support LTE interface. MC7304 tested with firmware SWI9X15C_05.05.67.00 | MiniPCI-e | N | LTE |
Sierra Wireless MC7430 | v6.xx and higher | Data channel 2, Info channel 2, Modem init: AT+CGATT=0, Dial-command: AT+CGATT=1;D*99#, also needs 3.0 pins isolated (PINS:23,25,27,31,33) | MiniPCI-e | LTE | Sierra Wireless MC74xx | v7.1 | Basic functionality support for modems with MBIM interface/USB composition | mini-PCIe | Sierra Wireless MC7455 | v7.3beta37 | MBIM mode with extended support for USB compositions: - 1009 - diag,modem,mbim
- 100D - diag,nmea,modem,mbim
| mini-PCIe | MiniPCI-e |
Quectel RM500Q-GL | 0x2c7c | 0x0800 | v7.1beta6 | MBIM LTE interface | m.2 |
Quectel RM500Q-AE | 0x2c7c | 0x0800 | v7.1beta6 | MBIM LTE interface | m.2 |
Quectel RM502Q-AE | 0x2c7c | 0x0800 | v7.1beta5 | MBIM LTE interface | m.2 |
Quectel RM510Q-GL | 0x2c7c | 0x0800 | 7.9 | MBIM LTE interface | m.2 |
Quectel UC15 |
|
| v6.xx | Works, ppp interface | MiniPCI-e |
Quectel UC20 |
|
| v6.xx | Works, ppp interface | MiniPCI-e |
R11e-4G | 0x2cd2 | 0x0003 | v6.42 | LTE interface. Supports multiple APN, LTE passthrough | MiniPCI-e |
R11e-LTE6 | 0x2cd2 | 0x0004 | v6.39.2 | LTE interface. Supports multiple APN, LTEpassthrough | MiniPCI-e |
R11e-LTE | 0x2cd2 | 0x0001 | v6.39.2 | LTE interface. Supports multiple APN, LTEpassthrough | MiniPCI-e |
Sierra Netgear AirCard 320U |
|
| 6.41 | Customer tested the modem with firmware 03.05.23 | USB |
Sierra wireless MC73xx |
|
| v6.xx(ppp) v7.xx (LTE) | Works! PPP interface. And starting with v7.xx it will support LTE interface. MC7304 tested with firmware SWI9X15C_05.05.67.00 | MiniPCI-e |
Sierra Wireless MC7430 |
|
| v6.xx and higher | Data channel 2, Info channel 2, Modem init: AT+CGATT=0, Dial-command: AT+CGATT=1;D*99#, also needs USB 3.0 pins isolated | MiniPCI-e |
Sierra Wireless MC74xx |
|
| v7.1 | MBIM LTE interface | mini-PCIe |
Sierra Wireless MC7455 | 0x1199 | 0x9071 | v7.3beta37 | MBIM LTE interface with extended support for USB compositions: - 1009 - diag,modem,mbim
- 100D - diag,nmea,modem,mbim
Regarding available modem USB compositions (device-id) please see modem manual, command AT!USBCOMP | mini-PCIe |
Sierra Wireless MC7710/MC7700/MC7750 |
|
| v5.25, v6.0 and 6.40RC43 | If modem uses firmware 3.5 it should be upgraded to 3.5.23.2 firmware release in order to work in RouterOS correctly again. | MiniPCI-e |
|
|
|
|
|
|
SIMcom various models | 0x1e0e | 0x9006 | v6.xx | PPP interface | Mini-PCIe USB device |
SIMcom various models | 0x1e0e | 0x9000 0x9001 0x9003 0x901a 0x901b 0x9205 | v6.xx | LTE interface Some modems may not work with RouterOS v7 on MMIPS-based RouterBoards (M11G, M33G, LtAP etc ), please use RouterOS v6. Regarding available modem USB compositions (device-id) please see modem manual, commands AT+CUSBPIDSWITCH; AT+CUSBCFG | m.2/mini-PCIe USB device |
SIMcom various models | 0x1e0e | 0x9003 0x9005 | v7.xx | MBIM LTE interface Regarding available modem USB compositions (device-id) please see modem manual, commands AT+CUSBPIDSWITCH; AT+CUSBCFG | m.2/mini-PCIe USB device |
SIMCom SIM8202G-M.2 | 0x1e0e | 0x901e | v7.11 | MBIM LTE interface Regarding available modem USB compositions (device-id) please see modem manual, command AT+CUSBCFG=usbid,1e0e,901e | m.2 USB device |
SIMCom SIM8262 | 0x1e0e | 0x901e | V7.14 | MBIM LTE interface + AT-Chat support |
|
SXT LTE 3-7 |
|
| v6 | LTE interface. Old version of SXT LTE | m.2 |
Sierra Wireless MC7710/MC7700/MC7750 | v5.25, v6.0 and 6.40RC43 | If modem uses firmware 3.5 it should be upgraded to 3.5.23.2 firmware release in order to work in RouterOS correctly again. | MiniPCI-e | N | LTE |
SIMcom SIM5360 | v6.xx | Works! Using PPP interface, vendor-id="0x05c6" device-id="0x9000" | MiniPCI-e / USB w/ converter | 3G | SIMcom SIM7100 | v6.xx(ppp) v7.xx (LTE) | Works! PPP interface. And starting with v7.xx it will support LTE interface. vendor-id="0x1e0e" device-id="0x9001" | MiniPCI-e / USB w/ converter | ? | LTE |
SXT LTE | v6 | LTE interface. Old version of SXT LTE | Built-in | N | LTE |
SXT LTE kit | v6.42 | LTE interface from R11e-LTE/R11e-LTE-US mini-pcie module | Built-in | Y | LTE |
Tele2.ru LTE-D402 |
|
| v6.47 | Config-less LTE interface |
N |
|
Telecom NZ T-Stick ZTE MF-181 |
|
| v6.0rc13 | Data Channel=2, Info Channel=2, APN internet.telecom.co.nz, PHONE=*99#. Tested ok for both data and SMS on CCR1016-12G | USB |
3GTelit FN980m |
|
| v7.5 | AT#USBCFG=2 | m.2 |
Telit LE910 | 0x1bc7 | 0x1201 | v6.xx | ppp interface |
, vendorid=0x1bc7 deviceid=0x1201? | LTE | Telit LE910C1 |
|
| v6.46 | Non-configurable from |
RouterOSRouterOS | MiniPCI-e |
Telit LE910C4 | 0x1bc7 | 0x1204 | v7.xx | Works in MBIM mode : LTE interface + AT-chat | MiniPCI-e |
LTE | Telit LM940 |
|
| v6.44 | LTE interface |
in In some cases needs 3.0 pins isolated |
(PINS:23,25,27,29,31,33)Y | LTE | Telit LM960 |
|
| v6.46 | LTE interface |
in In some cases needs 3.0 pins isolated |
(PINS:23,25,27,29,31,33)YLTE | TPS (Turning Point Solution) GCT450 |
|
| v6.48 | Config-less LTE interface | MiniPCI-e |
N | Vodafone (Huawei) K4203 |
|
| v7.xx | Not supported in ROS v6, but as this modem supports MBIM drivers support will be possible in ROS v7. | USB |
? | LTE | Vodafone K4201-Z |
|
| v6.8 | Some settings are ignored. LTE interface. | USB |
? | LTE | Vodafone K4305 |
|
| v6.7 | Some settings are ignored. | USB |
? | LTE | Vodafone K5160 |
|
| v6.37 | Some settings are ignored. | USB |
? | LTE | Yota LU150 |
|
| v5.22 and v6.4 | Some settings are ignored |
. Works in Russian markets? | LTE | Yota wifi modem |
|
| v6.7 | Some settings are ignored. |
Works in Russian markets.? | LTE | Yota WLTUBA-107 |
|
| v6.0 | Some settings are ignored. |
Works in Russian markets.? | LTE | ZTE 821D |
|
| v6.x | Set Info channel = 1, Data channel = 3, Dial command=ATDT | USB |
3G3G | ZTE ME3630-E |
|
| v6.40RC26 | ppp and LTE interface | MiniPCI-e |
? | LTE |
ZTE MF110 |
|
| v6.28 and higher | Set info channel = 2, data channel = 2, Dial command=ATM1L3DT | USB |
3G |
ZTE MF823 |
|
| v6.8 | Some settings are ignored. For some devices it's needed to enter in FACTORY mode to change operating state. | USB |
?LTE | ZTE MF825A |
|
| v6.xx | Some settings are ignored. | USB |
? | LTE | ZTE MF827 |
|
| v6.8 | Some settings are ignored. | USB |
? | |
ZTE MF832S |
|
| v7.10 | Config-less LTE interface may require to set some settings using at-chat or modem init string | USB |
LTE |
ZTE MF90 |
|
| v6.44beta32 and higher | LTE interface | USB |
N | LTE | Anteniti 3372h-153 | ...