Versions Compared

Old Version 9

changes.mady.by.user Deniss M.

Saved on

compared with

New Version Current

changes.mady.by.user Oskars K.

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Make sure your ISP is allowing hardware change and will issue an automatic IP address.
  • Open the bottom lid (see "Bottom Lid").
  • Connect an external antenna to the SMA connector (see "Antenna usage").
  • Connect the device to the power source (see "Powering").
  • Connect with your device to the MikroTik wireless network
  • The configuration has to be done through the wireless network using a web browser or mobile app - (see "MikroTik mobile app"). Alternatively, you can use the WinBox configuration tool https://mt.lv/winbox. By default, Ethernet port access is blocked by a firewall.
  • Once connected to the wireless network, open https://192.168.88.1 in your web browser to start the configuration.
  • user name: admin and there is no password by default (or, for some models, check user and wireless passwords on the sticker).
  • When using a mobile application choose Quick setup and it will guide you through all necessary configurations in six easy steps.
  • Find your LR Gateway ID on the label within the product and register it in your Network Server.
  • To make the device connect to the LR Network Server, please see "Configuration".
  • Click the "Check for updates" button and update your RouterOS software to the latest version, the device needs to have an active Internet connection.
  • After the update set your country, to apply country regulation settings.
  • Set your WiFi password.
  • Set the router password.
  • The following RouterOS "npk" packages are required for the core functionality of the product: lora, system.

Expansion slots and ports

  1. 10/100 Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X). Either straight or crossover cable can be used for connecting to other network devices.
  2. External SMA antenna connector is already connected to the LR card.
  3. Automotive connector. Pinout: A - reserved for future use (orange), B - reserved for future use (blue), C - ground (black), D – power in (red).

...

Internal antenna 4.7dBi can be used for setups, where the distance between the node and the device is up to 200 meters (the actual distance needs to the gateway is closer than 1kmbe checked in the environment). This antenna is attached and ready to be used.

If you wish to see To confirm how the antennas are attached:

...