...
| Property | Description |
|---|---|
| arp (disabled | enabled | proxy-arp | reply-only; Default: enabled) | Address Resolution Protocol |
| arp-timeout (time interval | auto; Default: auto) | |
| bridge (name; Default:) | |
| bridge-cost (integer [01..200000000]; Default: ) | Cost of the bridge port. |
| bridge-horizon (none | integer; Default: none) | If set to none bridge horizon will not be used. |
| cisco-static-id (integer [0..4294967295]; Default: 0) | Cisco-style VPLS tunnel ID. |
| comment (string; Default: ) | Short description of the item |
| disable-running-check (yes | no; Default: no) | Specifies whether to detect if an interface is running or not. If set to no interface will always have the running flag. |
| disabled (yes | no; Default: yes) | Defines whether an item is ignored or used. By default VPLS interface is disabled. |
| mac-address (MAC; Default: ) | |
| mtu (integer [32..65536]; Default: 1500) | |
| name (string; Default: ) | Name of the interface |
| pw-l2mtu (integer [0..65536]; Default: 1500) | L2MTU value advertised to a remote peer. |
| pw-type (raw-ethernet | tagged-ethernet | vpls; Default: raw-ethernet) | Pseudowire type. |
| peer (IP; Default: ) | The IP address of the remote peer. |
| pw-control-word (disabled | enabled | default; Default: default) | Enables/disables Control Word usage. Default values for regular and cisco style VPLS tunnels differ. Cisco style by default has control word usage disabled. Read more in the VPLS Control Word article. |
| vpls-id (AsNum | AsIp; Default: ) | A unique number that identifies the VPLS tunnel. Encoding is 2byte+4byte or 4byte+2byte number. |
...