...
RouterOS implements the Resource Public Key Infrastructure (RPKI) to Router Protocol defined in RFC8210. RTR is a very light weight lightweight low memory footprint protocol, to reliably get prefix validation data from RPKI validators.
More information on RPKI and how to set up validators can be found in the RIPE APNIC blog:
https://blog.apnic.net/20192022/1004/2806/how-to-installing-an-rpki-validator-2/
Basic Example
Let's consider that we have our own RTR server on our network with IP address 192.168.1.1:
Code Block |
---|
|
/routing/bgp/rpki
add group=myRpkiGroup address=192.168.1.1 port=8282 refresh-interval=20 |
If the connection is established and a database from the validator is received, we can check prefix validity:
Code Block |
---|
language | text |
---|
theme | FadeToGrey |
---|
|
[admin@rack1_b33_CCR1036] /routing> rpki-check group=myRpkiGroup prfx=70.132.18.0/24 origin-as=16509
valid |
Now the cached database can be used by routing filters to accept/reject prefixes based on RPKI validity. At first, we need to set up a filter rule which defines against which RPKI group perform performs the verification. After that filters are ready to match the status from the RPKI database. Status , can have one of three values:
- valid - database has a record and origin AS is valid.
- invalid - the database has a record and origin AS is invalid.
- unknown - database does not have information of prefix and origin AS.
- unverified - set when none of the RPKI sessions of the RPKI group has synced database. This value can be used to handle the total failure of the RPKI.
Code Block |
---|
|
/routing/filter/rule
add chain=bgp_in rule={ "rpki-verify= myRpkiGroup }"
add chain=bgp_in rule={ "if ([rpki invalid]) then={ action reject } else= { action accept }" |
Configuration Options
Sub-Menu: /routing/
...
rpki
Property | Description |
---|
address (IPv4/6) mandatory | Address of the RTR server |
disabled(yes | no; Default: no) | Whether the item is ignored. |
expire-interval (integer [600..172800]; Default: 7200) | Time interval [s] polled data is considered valid in the absence of a valid subsequent update from the validator. |
group (string |
;) mandatory | Name of the group |
to which will be is assigned to. |
port (integer [0..65535]; Default: 323) | Connection port number |
preference (integer [0..4294967295]; Default: 0) | If there are multiple RTR sources, the preference number indicates |
which will be , more is preferred. |
refresh-interval (integer [1..86400]; Default: 3600) | Time interval [s] to poll the newest data from the |
RPKI servervalidator. |
retry-interval (integer [1..7200]; Default: 600) | Time Interval [s] |
after to retry after the failed data poll from the |
servervalidator. |
vrf(name; Default: main) | Name of the VRF table used to bind the connection to. |