...
After the banner can be printed other important information, like /system note set by another admin, the last few critical log messages, demo version upgrade reminder, and default configuration description.
...
| Code Block | ||||
|---|---|---|---|---|
| ||||
[admin@MikroTik] > interface [enter] [admin@MikroTik] /interface> / [enter] [admin@MikroTik] > |
Use up arrow to recall previous commands (if this is a multiline command, then you can press F8 in order to expand it) from command history (commands that added sensitive data, like passwords, will not be available in the history), TAB key to automatically complete words in the command you are typing, ENTER key to execute the command, Control-C to interrupt currently running command and return to prompt and ? to display built-in help, in RouterOS v7, F1 has to be used instead.
...
Item numbers are assigned by the print command and are not constant - it is possible that two successive print commands will order items differently. But the results of the last print commands are memorized and, thus, once assigned, item numbers can be used even after add, remove and move operations (since version 3, move operation does not renumber items). Item numbers are assigned on a per session basis, they will remain the same until you quit the console or until the next print command is executed. Also, numbers are assigned separately for every item list, so /ip address print will not change the numbering of the interface list.
...