...
Property | Description |
---|---|
discover-interface-list (string; Default: static) | Interface list on which members the discovery protocol will run on |
lldp-mac-phy-config (yes | no; Default: no) | Whether to send MAC/PHY Configuration/Status TLV in LLDP, which indicates the interface capabilities, current setting of the duplex status, bit rate, and auto-negotiation. Only applies to the Ethernet interfaces. While TLV is optional in LLDP, it is mandatory when sending LLDP-MED, meaning this TLV will be included when necessary even though the property is configured as disabled. |
lldp-max-frame-size (yes | no; Default: no) | Whether to send Maximum Frame Size TLV in LLDP, which indicates the maximum frame size capability of the interface in bytes ( |
lldp-poe-power (yes | no; Default: yes) | Whether to send IEEE 802.3 Organizationally Specific Power Via MDI TLV in LLDP, which allows an exchange of information between a PSE and a PD. Only applies to the Ethernet interfaces that support PoE-Out. The sending of LLDP-MED Organizationally Specific Extended Power via MDI TLV is not configurable, and it is included in outgoing LLDP-MED packets when necessary. The setting is available since RouterOS version 7.15, and it replaces PoE-out port |
lldp-med-net-policy-vlan (integer 0..4094; Default: disabled) | Advertised VLAN ID for LLDP-MED Network Policy TLV. This allows assigning a VLAN ID for LLDP-MED capable devices, such as VoIP phones. The TLV will only be added to interfaces where LLDP-MED capable devices are discovered. Other TLV values are predefined and cannot be changed:
When used together with the bridge interface, the (R/M)STP protocol should be enabled with Additionally, other neighbor discovery protocols (e.g. CDP) should be excluded using |
mode (rx-only | tx-only | tx-and-rx; Default: tx-and-rx) | Selects the neighbor discovery packet sending and receiving mode. The setting is available since RouterOS version 7.7. |
protocol (cdp | lldp | mndp; Default: cdp,lldp,mndp) | List of used discovery protocols |
...