...
SNMP write support is only available for some OIDs. For supported OIDs SNMP v1, v2 or v3 write is supported.
Note |
---|
SNMP will respond to the query on the interface SNMP request was received from forcing responses to have same source address as request destination sent to the router |
...
Property | Description |
---|---|
address (IP/IPv6 address; Default: 0.0.0.0/0) | Addresses from which connections to SNMP server is allowed |
authentication-password (string; Default: "") | Password used to authenticate the connection to the server (SNMPv3) |
authentication-protocol (MD5 | SHA1; Default: MD5) | The protocol used for authentication (SNMPv3) |
encryption-password (string; Default: "") | the password used for encryption (SNMPv3) |
encryption-protocol (DES | AES; Default: DES) | encryption protocol to be used to encrypt the communication (SNMPv3). AES (see rfc3826) available since v6.16. |
name (string; Default: ) | |
read-access (yes | no; Default: yes) | Whether read access is enabled for this community |
security (authorized | none | private; Default: none) | |
write-access (yes | no; Default: no) | Whether write access is enabled for this community |
Management information base (MIB)
The Management Information Base (MIB) is the database of information maintained by the agent that the manager can query. You can download the latest MikroTik RouterOS MIB file from here: www.mikrotik.com/downloads
Used MIBs in RouterOS:
- MIKROTIK-MIB
- MIB-2
- HOST-RESOURCES-MIB
- IF-MIB
- IP-MIB
- IP-FORWARD-MIB
- IPV6-MIB
- BRIDGE-MIB
- DHCP-SERVER-MIB
- CISCO-AAA-SESSION-MIB
- ENTITY-MIB
- UPS-MIB
- SQUID-MIB
Object identifiers (OID)
Each OID identifies a variable that can be read via SNMP. Although the MIB file contains all the needed OID values, you can also print individual OID information in the console with the print oid command at any menu level:
...