...
| Code Block | ||
|---|---|---|
| ||
/ipv6 firewall filter add action=accept chain=input comment="defconf: accept ICMPv6 after RAW" protocol=icmpv6 add action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=established,related,untracked add action=accept chain=input comment="defconf: accept UDP traceroute" port=33434-33534 protocol=udp add action=accept chain=input comment="defconf: accept DHCPv6-Client prefix delegation." dst-port=546 protocol=udp src-address=fe80::/16 add action=accept chain=input comment="defconf: accept IKE" dst-port=500,4500 protocol=udp add action=accept chain=input comment="defconf: accept IPSec AH" protocol=ipsec-ah add action=accept chain=input comment="defconf: accept IPSec ESP" protocol=ipsec-esp add action=drop chain=input comment="defconf: drop all not coming from LAN" in-interface-list=!LAN |
| Note |
|---|
In certain setups where the DHCPv6 relay is used, the src address of the packets may not be from the link-local range. In that case, the src-address parameter of rule #4 must be removed or adjusted to accept the relay address. |
Protect the Clients
Before the actual set of rules, let's create a necessary address-list that contains all IPv4/6 addresses that cannot be forwarded.
...