(total of 15 seconds)
| Table of Contents |
|---|
RouterBOOT is responsible for starting RouterOS in RouterBOARD devices.
...
- Hold this button during boot time until the LED light starts flashing, release the button to reset the RouterOS configuration (total 5 seconds)
- Keep holding for 5 more seconds, LED turns solid, release now to turn on CAPs mode (total 10 seconds)
- Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD look for Netinstall servers (total of 15 seconds)
| Note |
|---|
If you hold the button before applying power, backup RouterBOOT will be used in addition to all the above actions. To do the above actions without loading the backup loader, push the button right after applying power to the device. |
...