Versions Compared

Old Version 24

changes.mady.by.user Oskars K.

Saved on

compared with

New Version Current

changes.mady.by.user Oskars K.

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

PropertyDescription
auth (md5 | sha1 | null | sha256 | sha512; Default: sha1,md5,sha256,sha512)Authentication methods that the server will accept.
certificate (name | none; Default: none)Name of the certificate that the OVPN server will use.
cipher (null | aes128-cbc | aes128-gcm | aes192-cbc | aes192-gcm | aes256-cbc | aes256-gcm | blowfish128; Default: aes128-cbc,blowfish128)Allowed ciphers.
default-profile (name; Default: default)Default profile to use.
enabled (yes | no; Default: no)Defines whether the OVPN server is enabled or not.
protocol (tcp | udp; Default: tcp)Indicates the protocol to use when connecting with the remote endpoint.
keepalive-timeout (integer | disabled; Default: 60)Defines the time period (in seconds) after which the router is starting to send keepalive packets every second. If no traffic and no keepalive responses have come for that period of time (i.e. 2 * keepalive-timeout), not responding client is proclaimed disconnected
mac-address (MAC; Default: )Automatically generated MAC address of the server.
max-mtu (integer; Default: 1500)Maximum Transmission Unit. Max packet size that the OVPN interface will be able to send without packet fragmentation.
mode (ip | ethernet; Default: ip)Layer3 or layer2 tunnel mode (alternatively tun, tap)
netmask (integer; Default: 24)Subnet mask to be applied to the client.
port (integer; Default: 1194)Port to run the server on.
require-client-certificate (yes | no; Default: no)If set to yes, then the server checks whether the client's certificate belongs to the same certificate chain.
redirect-gateway (def1 | disabled | ipv6; Default: disabled) 

Specifies what kind of routes the OVPN client must add to the routing table. 

def1 – Use this flag to override the default gateway by using 0.0.0.0/1 and 128.0.0.0/1 rather than 0.0.0.0/0. This has the benefit of overriding but not wiping out the original default gateway.
disabled - Do not send redirect-gateway flags to the OVPN client.
ipv6 - Redirect IPv6 routing into the tunnel on the client side. This works similarly to the def1 flag, that is, more specific IPv6 routes are added (2000::/4 and 3000::/4), covering the whole IPv6 unicast space.

enable-tun-ipv6 (yes | no; Default: no)

Specifies if IPv6 IP tunneling mode should be possible with this OVPN server.

ipv6-prefix-len (integer; Default: 64)

Length of IPv6 prefix for IPv6 address which will be used when generating OVPN interface on the server side.

reneg-sec  (integer; Default: 3600)

Key renegotiate seconds, the time the server periodically renegotiates the secret key for the data channel.

push-routes (string; Default: )

Push route support are added in 7.14, the maximum of possible input is limited to 1400 characters. 

tls-version (any | only-1.2 ; Default: any )

TLS protocol setting.

tun-server-ipv6 (IPv6 prefix; Default: ::)

IPv6 prefix address which will be used when generating the OVPN interface on the server side.

...

Code Block
languageros
/interface ovpn-server server set enabled=yes certificate=server

Client Config

Push route support are added in 7.14, the maximum of possible input is limited to 1400 characters. 
example: route network/IP [netmask] [gateway] [metric].

...