Please connect and disconnect the antenna, when the device is turned off!
We recommend using our antenna https://mikrotik.com/product/mant_lte_5o
front cover to access PCB
In case there is a need to access PCB, the back front cover can be removed.
- Remove center screw;
- Use a small screwdriver to pry open backplate cover in marked spots;
- Continue to pry it open by going up;
- At the end lift off the whole backplatecover.
Operating system support
To avoid pollution of the environment, please separate the device from household waste and dispose of it in a safe manner, such as in at designated waste disposal sites. Familiarize yourself with the procedures for the proper transportation of the equipment to the designated disposal sites in your area.