...
You can run the command /system default-configuration print to see the exact applied default configuration commands.
CPE Router
In this type of configuration, the router is configured as a wireless client device. WAN interface is a Wireless interface. WAN port has configured DHCP client, is protected by IP firewall and MAC discovery/connection is disabled.
...
| Info | ||||||
|---|---|---|---|---|---|---|
CPE RouterMode:
wlan1 Configuration:
LAN Configuration:
WAN (gateway) Configuration:
Login
Configuration preview :
|
LTE CPE AP router
This configuration type is applied to routers that have both LTE and wireless interfaces. LTE interface is considered a WAN port protected by a firewall and MAC discovery/connection disabled. The IP address on the WAN port is acquired automatically. Wireless is configured as an access point and bridged with all available Ethernet ports.
...
| Info | ||||||
|---|---|---|---|---|---|---|
CPE RouterMode: * wireless interface connected to providers network (WAN> * WAN port is protected by firewall and enabled DHCP cli> LAN Configuration:
WAN (gateway) Configuration:
Login
Configuration preview :
|
AP Router
This type of configuration is applied to home access point routers to be used straight out of the box without additional configuration (except router passwords and wireless keys)
...
| Info | ||||||
|---|---|---|---|---|---|---|
RouterMode: * WAN port is protected by firewall and enabled DHCP cli> * Wireless and Ethernet interfaces (except WAN port/s) are part of the LAN bridge LAN Configuration:
wlan1 Configuration:
WAN (gateway) Configuration:
Login
Configuration preview :
|
PTP Bridge, W60G Bridge:
Bridged Ethernet with a wireless interface. The default IP address 192.168.88.1/24 is set on the bridge interface. There are two possible options - CPE and AP. For CPE wireless interface is set in "station-bridge" mode, and for AP "bridge" mode is used. W60G Bridge - This configuration type is applied to routers that have a 60 GHz point-to-point link.
...
- Cube, Cube Pro
- nRAY, Dish
- Wireless Wire Dish, nRAY, Cube, Cube Pro
- Wireless Wire kit
- wAP 60G - with level3 license
WISP Bridge
The configuration is the same as PTP Bridge in AP mode, except that wireless mode is set to ap_bridge for PTMP setups. The router can be accessed directly using a MAC address. If the device is connected to the network with an enabled DHCP server, configured DHCP client configured on the bridge interface will get the IP address, that can be used to access the router.
...
| Info | ||||||
|---|---|---|---|---|---|---|
WISP Bridge: * wireless and LAN interfaces are bridged; wlan1 Configuration:
wlan2 Configuration:
LAN Configuration:
Login
Configuration preview :
|
Switch
This configuration utilizes switch chip features to configure a basic switch. All Ethernet ports are added to switch group and default IP address 192.168.88.1/24 is set on bridge interface.
...
| Info | ||||||
|---|---|---|---|---|---|---|
Switch mode:
Login
Configuration preview :
|
IP Only
When no specific configuration is found, IP address 192.168.88.1/24 is set on ether1, or combo1, or sfp1.
...
| Info | ||||||
|---|---|---|---|---|---|---|
LAN:
Login
Configuration preview :
|
CAP
This type of configuration is used when a device needs to be used as a wireless client device controlled by CAPsMAN.
...