Versions Compared

Old Version 10

changes.mady.by.user Oskars K.

Saved on

compared with

New Version Current

changes.mady.by.user Serhii T.

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Choose your powering solution, please see the Powering section for possibilities.
  • Connect your Internet cable to port 1, and local network devices to other ports Ethernet1.
  • Set your computer IP configuration to automatic (DHCP).
  • Wireless access point mode is enabled by default (or, for some models, check user and Connect to the device through any of the ports, excluding Ethernet1, or the wireless network "MikroTik-..." (ensure to check the wireless passwords on the sticker)..
  • Connect your direct input power jack if not using POE, to start up the device.
  • The device will boot up and after a short beep Wireless network will be available for connecting.
  • Open network connections on your PC, mobile phone, or other device and search for MikroTik wireless network and connect to it.
  • Once connected to the wireless network, open https://192.168.88.1Image Removed in your web browser to start configuration, since there is no password by default, you will be logged in automatically.
  • .
  • Establish a connection using a mobile application. Alternatively, use Webfig in a web browser or the "WinBox" configuration tool at https://mt.lv/winbox.
  • Start configuration within the chosen tool, using the default IP address 192.168.88.1. If the IP address is unavailable, use Winbox and choose the "Neighbors" tab to find the device.
  • Proceed to connect using the MAC address. The username is "admin," and there is no password (or, for some models, check user and wireless passwords on the sticker).
  • Click the "Check for updates" button and update RouterOS to the latest version.
  • For a manual update of the device, visit the products page at https://mikrotik.com/products to find your product. The required packages are accessible under the "Support&Downloads" menu.
  • Upload downloaded packages to the WebFig or Winbox "Files" menu and reboot the device.
  • By upgrading We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best performance and stability., you can ensure optimal performance, stability, and security updates.
  • In the "QuickSet" menu set up the following: Choose your country, to apply country regulation settings, and set .
  • Set up your wireless network password in the left field.
  • Set up your router password on the screen that loadsin the bottom field.

Powering

The power consumption under maximum load can reach 44 W. The device accepts power from the power jack or from the first Ethernet port:

...

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery.

Operating system support

The device supports RouterOS software version 6 . The specific factory-installed version number is and RouterOS version 7 or above, as indicated in the RouterOS menu under /system resource. Other operating systems have not been tested.

Accessories

Package includes the following accessories that come with the device:

...