Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Connect your Internet cable to port 1, and local network PCs to ports 2-5.
  • Set your computer IP configuration to automatic (DHCP).
  • Wireless "access point" mode is enabled by default, you can connect to the wireless network name which starts with "MikroTik".
  • Once connected to the wireless network, open https://192.168.88.1 in your web browser to start configuration, since there is no password by default, you will be logged in automatically (or, for some models, check user and wireless passwords on the sticker).
  • We recommend clicking the "Check for updates" button on the right side and updating your RouterOS software to the latest version to ensure the best performance and stability.
  • To personalize your wireless network, SSID can be changed in the fields "Network Name".
  • Choose your country on the left side of the screen in the field "Country", to apply country regulation settings.
  • Set up your wireless network password in the field "WiFi Password" the password must be at least eight symbols.
  • Set up your router password in the bottom field "Password" to the right and repeat it in the field "Confirm Password", it will be used to login next time.
  • Click on the "Apply Configuration" to save changes.

...

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter.

IMPORTANT: Exposure to Radio Frequency Radiation.
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and any part of your body.

...

UKCA marking

Eurasian Conformity Mark

Частотный диапазон

Мощность передатчика

2400-2483.5 МГц

≤100 мВт

*Доступные частотные каналы могут различаться в зависимости от модели продукта и сертификации. 

...

Frequency bands terms of use

Frequency range (for applicable models)

Channels used

Maximum Output Power (EIRP)

Restriction

2400-2483.5 MHz

1 - 13

20 dBm

Without any restriction to use in all EU Member States

* It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed!

...