...
- Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts.
- The product comes without enclosure and is meant to be installed into the enclosure by trained and qualified personnel. The installer is responsible for making sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.
- Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
- This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for
making sure, that the Installation of the equipment is compliant with local and national electrical codes. - Do not attempt to disassemble, repair, or modify the device. If service is needed, please contact MikroTik support
- This product can be used both indoors and outdoors. Please read the mounting instructions carefully before beginning installation. Failure to
use the correct hardware and configuration or to follow correct procedures could result in hazardous situation to people and damage to the
system. To install outdoors make sure to use at least IP54 rating enclosure. - We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and
operate at your own risk! - The socket-outlet shall be installed near the equipment and shall be easily accessible
- In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power
outlet. - To avoid contamination of the environment, separate the device from household waste and dispose of it in a safe manner, for example, in
designated areas. Become familiar with procedures for properly transporting the equipment to designated collection points in your area.
...