...
| Property | Description |
|---|---|
| accounting-backup (yes | no; Default: no) | Whether the configuration is for the backup RADIUS server |
| accounting-port (integer [1..65535]; Default: 1813) | RADIUS server port used for accounting |
| address (IPv4/IPv6 address; Default: 0.0.0.0) | IPv4 or IPv6 address of RADIUS server. The following formats are accepted: - ipv4 |
| authentication-port (integer [1..65535]; Default: 1812) | RADIUS server port used for authentication. |
| called-id (string; Default: ) | Value depends on Point-to-Point protocol: PPPoE - service name, PPTP - server's IP address, L2TP - server's IP address. |
| certificate (string; Default: ) | Certificate file to use for communicating with RADIUS Server with RadSec enabled. |
| comment (string; Default: ) | |
| disabled (yes | no; Default: no) | |
| domain (string; Default: ) | Microsoft Windows domain of client passed to RADIUS servers that require domain validation. |
| protocol (radsec | udp; Default: udp) | Specifies the protocol to use when communicating with the RADIUS Server. |
| realm (string; Default: ) | Explicitly stated realm (user domain), so the users do not have to provide proper ISP domain name in the user name. |
| secret (string; Default: ) | The shared secret used to access the RADIUS server. |
| service (ppp|login|hotspot|wireless|dhcp; Default: ) | Router services that will use this RADIUS server:
|
| src-address (ipv4/ipv6 address; Default: 0.0.0.0) | Source IP/IPv6 address of the packets sent to the RADIUS server |
| timeout (time; Default: 100ms) | Timeout after which the request should be resent, example radius set timeout=300ms numbers=0 |
...
| Property | Description |
|---|---|
| accept (yes | no; Default: no) | Whether to accept the unsolicited messages |
| port (integer; Default: 1700) | The port number to listen for the requests on |
vrf (VRF name; default value: main) | Set VRF on which service is listening for incoming connections |