...
- Hold this button during boot time until the LED light starts flashing, and release the button to reset the RouterOS configuration (total 5 seconds)
- Keep holding for 5 more seconds, LED turns solid, release now to turn on CAPs mode (total 10 seconds)
- Or Keep holding the button for 5 more seconds until the LED turns off, then release it to make the RouterBOARD look for Netinstall servers
...
For RouterBOARD devices that feature a serial console connector, it is possible to access the RouterBOOT loader configuration menu. The required cable is described in the Serial Console manual. RouterBOARD serial port is configured to 115200bit/s, 8 data bits, 1 stop bit, and no parity. We suggest disabling the hardware flow control.
...
This command shows the current RouterBOOT version of your device and the available upgrade which is either included in routerboard routeros-x.yy.npk package, or if you uploaded an a *.FWF file corresponding to the device model:
...