Versions Compared

Old Version 2

changes.mady.by.user Oskars K.

Saved on

compared with

New Version 3

changes.mady.by.user Oskars K.

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Open the ethernet door to connect an ethernet cable to the ethernet port, connect the other end of the ethernet cable to the included PoE injector (LHG Lite60), or an 802.3af/at the power source (supported only by the LHG 60G model).
  2. Plug the PoE injector into your network switch or ISP internet outlet.
  3. Plug the included power supply into the PoE injector to start up the device.
  4. For configuration purposes, set your computer IP configuration to static in the range of 192.168.88.0-254 (/24 or 255.255.255.0)
  5. The default IP address of the unit is 192.168.88.31/24, open this address in your web browser to start the configuration. The username is admin and there is no password.

...

The routerBOOT reset button has the following functions. Press the button and apply the power, then:

  • Release the button when the green LED starts flashing, to reset RouterOS configuration to defaults.
  • Release the button when the LED turns solid green to clear all configuration and defaults.
  • Release the button after LED is no longer lit (~20 seconds) to cause the device to look for Netinstall servers (required for reinstalling RouterOS over the network).

...