...
Property | Type | Description |
---|---|---|
Numeric properties | ||
distance | route distance | |
scope | ||
scope-target | target scope | |
bgp-weight | BGP WEIGHT attribute | |
bgp-med | BGP MED attribute local to the router. It is also used in the output of iBGP peers. | |
bgp-out-med | BGP MED attribute to be sent to a remote peer. Should be used in the output chain of eBGP peers. | |
bgp-local-pref | BGP LOCALPREF attribute | |
bgp-igp-metric | BGP IGP METRIC | |
bgp-path-peer-prepend | Prepend last received remote peers ASN. If the prefix is originated from the router, then this parameter will not do anything on the router's output, because ASN does not exist yet. If used as a matcher in BGP input, it is possible to filter prefixes exceeding a certain number of prepends. For example, if remote peer prepends its ASN 5 times, but we want to allow max 4 times prepended ASN, then we can use: " This parameter also overrides any prepends received from the remote peer, for example, if the remote peer prepended its AS 3 times, we can remove this prepend by setting " | |
bgp-path-prepend | Prepend routers ASN, should be used in BGP output. | |
ospf-ext-metric | OSPF External route metric | |
ospf-ext-tag | OSPF external route tag | |
rip-ext-metric | RIP External route metric | |
rip-ext-tag | RIP External route tag | |
Flag properties | ||
ospf-ext-dn | DN bit for external OSPF routes | |
blackhole | ||
use-te-nexthop | ||
Other properties | ||
gw | ipv4/6 address | |
gw-interface | interface_name | |
gw-check | none|arp|icmp|bfd|bfd-mh | |
pref-src | ipv4/6 address | |
bgp-origin | igp|egp|incomplete | |
ospf-ext-fwd | ipv4/6 address | |
ospf-ext-type | type1|type2 | |
comment | string | |
bgp-communites | inline_community_set | set_name | |
bgp-ext-communities | ||
bgp-large-communities |
...