...
| Warning |
|---|
Installing the wifiwave2 package disables other means of configuring wireless interfaces. Before installation, make sure to back up any wireless and CAPsMAN configuration you may want to retain. |
Table of Contents
Requirements
The wifiwave2 package is compatible with IPQ4019 and QCA9984 wireless interfaces and is only available for ARM builds of RouterOS v7. It also requires 14MB of free space and at least 256MB of RAM.
As of the release of RouterOS 7.1rc11, this means it is compatible with 4 devices:
...
| Note |
|---|
Take care when writing access list rules which reject clients. After being repeatedly rejected by an AP, a client device may start avoiding it. |
Filter parameters
| Parameter | Description |
|---|---|
| allow-signal-out-of-range (time period) | Modifies the signal-range parameter to still match established connections for a given length of time, even if their signal is outside the specified range. Default: 0s. |
| interface (interface|interface-list|'any') | Match if connection takes place on the specified interface or interface belonging to specified list. Default: any. |
| mac-address (MAC address) | Match if the client device has the specified MAC address. No default value. |
| mac-address-mask (MAC address) | Modifies the mac-address parameter to match if it is equal to the result of performing bit-wise AND operation on the client MAC address and the given address mask. Default: FF:FF:FF:FF:FF:FF (i.e. client's MAC address must match value of mac-address exactly) |
| signal-range (min..max) | Match if the strength of received signal from the client device is within the given range. Default: '-120..120' |
| ssid-regexp (regex) | Match if the given regular expression matches the SSID. |
| time (start-end,days) | Match during the specified time of day and (optionally) days of week. Default: 0s-1d |
Action parameters
| Parameter | Description |
|---|---|
| action (accept|reject|query-radius) | Whether to authorize a connection
|
| passphrase (string) | Override the default passphrase with given value. No default value. |
| radius-accounting (no|yes) | Override the default RADIUS accounting policy with given value. No default value. |
Access rule examples
Only accept connections to guest network from nearby devices during business hours
...