...
- Yellow - partially working
- Green - Working
- Red - Not working at the moment
Feature | v7.0Beta7 | v7.1Beta1 | v7.1Beta2 | v7.1Beta3 | v7.1Beta4 | v7.1rc1 | v7.1rc2 | v7.1rc3 | v7.1rc5 | v7.1rc6 |
|---|---|---|---|---|---|---|---|---|---|---|
| Winbox | ||||||||||
| BGP support | ||||||||||
| OSPF support | ||||||||||
| RIP support | ||||||||||
| Router ID support | ||||||||||
| Routing filter support | Sets rule as string | |||||||||
| Generic | ||||||||||
| /31 address support | N/A | |||||||||
| Convert route rules after upgrade from v6.x | N/A | OK | ||||||||
| Static IPv6 upgrade from ROS v6 | NOK | OK | ||||||||
| IPv4 Route Rules | OK | |||||||||
| IPv6 Route Rules | NOK | OK | ||||||||
| ECMP flags | OK | |||||||||
| dst@table | OK | |||||||||
| gateway@table | OK | |||||||||
| gateway%interface | OK | |||||||||
| recursive route over ipv6 LL address | OK | |||||||||
| 3 level recursive gateway with ECMP | OK | |||||||||
| IPV6 ECMP | OK | |||||||||
| IPv6 connected ECMP | N/A | OK | ||||||||
| Addresses from same subnet to multiple interfaces | NOK | |||||||||
| Show time when route was last updated | N/A | |||||||||
| Check Gateway | Ping OK, ARP NOK (works as ping), BFD NOK (not implemented) | |||||||||
| Scope and target scope | OK | |||||||||
| IPv4 Mangle routing-mark | OK | |||||||||
| IPv6 Mangle routing-mark | NOK (Added but does not work at the moment) | OK | ||||||||
| Packet SRC address | NOK (wrong src is picked for locally originated packets) | Does not work correctly with /32 addresses | ||||||||
| Routing-table parameter for ping and telnet | NOK | |||||||||
| Show if route is hardware accelerated | N/A | Shows if route is candidate for HW acceleration | ||||||||
| Custom route selection policy | N/A | |||||||||
| IPv4 with IPv6 nexthops and RFC5549 | N/A | OK | ||||||||
| Routing Instance | OK | Renamed to Router-ID | ||||||||
| VRF | Needs more testing | |||||||||
| Management services support for VRFs | N/A | telnet, ssh, api, winbox services can be set to listen on specific VRF | ||||||||
| Some kind of mechanism to import/export routes from one vrf to another within same router | N/A | |||||||||
| BFD | N/A | |||||||||
| OSPF | ||||||||||
| Convert OSPF config from v6 to v7 after upgrade | N/A | Known conversion problems:
| ||||||||
| OSPF neighbors in NSSA Area | Cannot establish adjacency | |||||||||
| OSPF in broadcast network | Does not work with more than 2 neighbors | OK | ||||||||
| OSPF with routing filters | OK | |||||||||
| OSPF Virtual Link | OK | |||||||||
| OPSF input filtering | N/A | |||||||||
| HMAC-SHA auth RFC5709 | N/A | |||||||||
| BGP and OSPF SNMP monitoring | N/A | |||||||||
| BGP | ||||||||||
| Convert BGP config from v6 to v7 after upgrade | N/A | OK | ||||||||
| BGP Templates and dynamic peers | OK | |||||||||
| BGP connect listen on a network | OK | |||||||||
| BGP guess remote.as | OK | |||||||||
| Show from which peer route received | OK ( /routing/route/print detail --> belongs-to) | |||||||||
| BGP Address Families | Currently only IPv4, IPv6 | |||||||||
| BGP input.accept-* | Does not work right after peer established, need to resend routes | |||||||||
| eBGP nexthop self | OK | |||||||||
| Input Filter | OK | |||||||||
| Output Filter | OK | |||||||||
| BGP Local address auto selection | OK | |||||||||
| BGP route reflect | OK | |||||||||
| BGP route server | OK | |||||||||
| BGP Roles https://datatracker.ietf.org/doc/draft-ietf-idr-bgp-open-policy/?include_text=1 | OK | |||||||||
| BGP peer-cache uptime in "established" state | N/A | |||||||||
| BGP Flow Spec | Flow spec attributes are forwarded | |||||||||
| BGP Selection | OK | |||||||||
| BGP Selection (Multipath) | N/A | |||||||||
| BGP Confederation | OK | |||||||||
| BGP Aggregation | N/A | |||||||||
| BGP ORF | N/A | |||||||||
| Discard prefix RTBH RFC 6666 | N/A | |||||||||
| AS-wide Unique BGP Identifier RFC 6286 | N/A | |||||||||
| Exported PDU PCAP saver | Ok | |||||||||
| Exported PDU PCAP loader | ||||||||||
| MPLS | ||||||||||
| Static label mapping | N/A | |||||||||
| Static mapping upgrade from v6 | ||||||||||
| LDP IPv4 mapping | N/A | Ok | ||||||||
| LDP IPv6 mapping | N/A | |||||||||
| LDP signaled VPLS | N/A | Ok | ||||||||
| LDP config upgrade from v6 | N/A | |||||||||
| TE | N/A | |||||||||
| TE Config upgrade from v6 | N/A | |||||||||
| VPLS Encap to TE | N/A | |||||||||
| BGP signaled VPLS | N/A | |||||||||
| VPLS config upgrade from v6 | N/A | |||||||||
| Fast reroute | N/A | |||||||||
| MPLS ECMP | N/A | |||||||||
| One label per VRF | N/A | |||||||||
| Ability to use MPLS EXP-bit in Queues | N/A | |||||||||
| MPLS Fast-Path | N/A | |||||||||
| RPKI session | OK | |||||||||
| RPKI possibility to view received info of specific prefix | N/A | OK | ||||||||
| RPKI show connection status | N/A | Ok | ||||||||
| Filters | ||||||||||
| Convert routing filters after upgrade from v6.x | N/A | some as-path matching regexps may not be upgraded | ||||||||
| Syntax completion | N/A | Completion works but needs fine-tuning | ||||||||
| Routing filter chain drop by default without rules | OK | |||||||||
| Routing filter prefix match | OK | |||||||||
| Routing filter protocol match | Missing other protocols like modem DHCP etc (these routes are not matched by "static") | |||||||||
| Routing filter append communities | OK | |||||||||
| Routing filter append large community | OK | |||||||||
| Routing filter set weight | "sub, add" does not work if attribute has default unset value, if attribute is not set then default value should be assumed. | |||||||||
| Routing filter set local pref | "sub, add" does not work if attribute has default unset value, default value should be 100 if not set. | |||||||||
| Routing filter set MED | "sub,add" should assume default value. | |||||||||
| Routing filter set origin | OK | |||||||||
| Routing filter set igp metric from OSPF cost | Can be set with set-num-prop=bgp-igp-metric<add>ospf-ext-metric or ospf-metric, but what to do if it is not possible to guess which metric to use? | |||||||||
| Routing filter match prefix with address list | OK | |||||||||
| Routing filter match community/large community lists | OK | |||||||||
| Routing filter add prefix to address list | N/A | |||||||||
| Routing filter validate prefix with RPKI | OK | |||||||||
| Multicast | ||||||||||
| IGMP-Proxy | N/A | |||||||||
| PIM-SM | ||||||||||
Performance Status
Used hardware:
...