...
When the device wakes from the factory sleep for the first time, it has this default configuration:
Configuration parameter | Setting/value |
---|---|
Advertising packet format | MikroTik |
Advertising interval | 5.0 seconds |
Angle Threshold/Tilt trigger | 60° |
Freefall Threshold/Accelerometer trigger | 156.25 mg |
Wakeup Threshold/Wakeup trigger | 1.0 mg |
Bandwith Filter | 0.8 Hz |
Low noise filter |
disabled | |
Tx Power | 6 dBm |
The magnet is used on the reed switch to change the tag's operating modes as described above. As soon as the magnet is detected (the reed switch is activated), the LED will start flashing for the next 5 seconds (first 5 seconds) and, then, stop. It can help you identify that 5 seconds have passed and that you can remove the magnet to enter configuration mode.
...