...
| Configuration parameter | Setting/value |
|---|---|
| Advertising packet format | MikroTik |
| Advertising Interval | 5.0 seconds |
| Tilt trigger | 60° |
| Accelerometer trigger | 156.25 mg |
| Low noise filter | enabled |
| Tx Power | 6 dBm |
Using The magnet is used on the reed switch means putting the magnet over the device for a specific time (depending on the mode you wish the device to be in)to change the tag's operating modes as described above. As soon as the magnet is detected (the reed switch is activated), the LED will start flashing for the next 5 seconds (first 5 seconds) and, then, stop. It can help you identify that 5 seconds have passed and that you can remove the magnet to enter configuration mode.
...