...
There are 3 options available on this screen:
To run "QR Code" reader | To change the order for recognized tags | To turn on/off background scan, which will automatically scan for the nearby tags and/or check app version |
To "wake up" the tag, the reed switch should be activated for about 3-10 seconds (activating the reed switch = putting a magnet over the Bluetooth logo).
...
Each type has an option to configure 3 parameters:
Property | Description |
---|---|
Advertisement interval (20ms...10s) | the interval in milliseconds after which an advertisement will be sent |
Freefall detect (on/off) | whether to send an advertisement when accelerometer detects a freefall trigger |
Tilt detect (on/off) | whether to send an advertisement when accelerometer detects a 6D/tilt trigger |
Accelerometer settings:
In this menu, you can set up thresholds for the triggers.
Property | Description |
---|---|
Tilt trigger (50°...80°) | the threshold for a tilt/4D/6D function |
Accelerometer trigger |
|
Low noise filter (on/off) | whether to enable low noise filter - to reduce noise density in measurements |
Tx Power (-28dBm...6dBm) | the transmit power level in decibel-milliwatts |
System
...
In the "System" tab you can view the logs (access to saved info, error and other log messages), put the tag into factory sleep (if the mode is enabled, MCU will wait for the client to disconnect and then enter Factory sleep mode) and upgrade the firmware.
Property | Description |
---|---|
Logs | View system logs |
Factory sleep | Enters factory sleep mode |
Upgrade Firmware | Allows to upgrade Bluetooth tag firmware version |