Versions Compared

Old Version 5

changes.mady.by.user Oskars K.

Saved on

compared with

New Version 6

changes.mady.by.user Oskars K.

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Unscrew the cover to reach Ethernet port;
  • Guide Ethernet cable trough opening;
  • Plug into the Ethernet port and screw clockwise tightly, to ensure water protection;
  • Connect the PoE injector into the computer;
  • Connect the power adapter to the PoE injector;
  • Download WinBox configuration tool https://mt.lv/winbox, or use Web browser;
  • Default IP: 192.168.88.2 and 192.168.88.13, user name: admin and there is no password, for the paired models, please find the password on the sticker;
  • By the default devices are configured as W60G Bridge;
  • Once connected, configure the device, so it has an active Internet connection https://mt.lv/configuration, or proceed to the next step to upgrade software manually;
  • Upgrade the RouterOS software to the latest version https://mt.lv/upgrade;
  • Connect again and choose your country on the left side of the screen, to apply country regulation settings;Region, this can be done in the Wireless menu W60G tab;
  • Double click on the W60G interface, go to the Wireless tab and choose your Region;Set up your router password in the bottom field, to the right and repeat it, it will be used to login next time.

Powering

The device accepts power 802.3af/at PoE in 12 – 57 V DC ⎓.
The power consumption under maximum load can reach 6 W.
Connecting to a PoE Adapter:

...

We recommend clicking the "Check for updates" button in the QuickSet menu, as updating your RouterOS software to the latest version ensures the best performance and stability. Please make sure you have selected the country where the device will be used, to conform with local regulations.
RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to the possibilities: https://mt.lv/help. In case IP connection is not available, the Winbox tool (https://mt.lv/winbox) can be used to connect to the MAC address of the device from the LAN side (all access is blocked from the Internet port by default). Seek additional help from your local trainers or become a trainer of yourself. https://mikrotik.com/training/about
For recovery purposes, it is possible to boot the device for reinstallation, see section Buttons and Jumpers 28606618.

Reset button

The reset button has three functions:

...